11:23 <DC-IRC> <foutkassir> it does stuck at this stage after reboot

11:23 <DC-IRC> <foutkassir> ```

11:23 <DC-IRC> <foutkassir> ## Loading init Ramdisk from Legacy Image at 43400000 ...

11:23 <DC-IRC> <foutkassir> Image Name: uInitrd

11:24 <DC-IRC> <foutkassir> Image Type: ARM Linux RAMDisk Image (gzip compressed)

11:24 <DC-IRC> <foutkassir> Data Size: 9860491 Bytes = 9.4 MiB

11:24 <DC-IRC> <foutkassir> Load Address: 00000000

11:24 <DC-IRC> <foutkassir> Entry Point: 00000000

11:24 <DC-IRC> <foutkassir> Verifying Checksum ... OK

11:24 <DC-IRC> <foutkassir> ## Flattened Device Tree blob at 43000000

11:24 <DC-IRC> <foutkassir> Booting using the fdt blob at 0x43000000

11:24 <DC-IRC> <foutkassir> EHCI failed to shut down host controller.

11:24 <DC-IRC> <foutkassir> Loading Ramdisk to 49698000, end 49fff58b ... OK

11:24 <DC-IRC> <foutkassir> Loading Device Tree to 49627000, end 49697fff ... OK

11:24 <DC-IRC> <foutkassir> Starting kernel ...

11:24 <DC-IRC> <foutkassir> ```

11:24 <DC-IRC> <foutkassir> now it's not booting anymore. I am powering it using my serial usb

11:32 <juri_> is that after a kernel update?

11:32 <DC-IRC> <foutkassir> I am a bit worried about the powering I tried to switch to micro usb cable and now it's booting

11:33 <DC-IRC> <foutkassir> I don't know if my jumper wire causing some issue

11:33 <juri_> yeah. :)

11:33 <juri_> tl;dr: at the point you start kernel, a lot of power is consumed, compared to earlier in the boot process.

11:33 <juri_> so, that's likely power supply related.

11:52 <archetech> yep

12:33 <DC-IRC> <quantibility> Hi i need help with a OS issue. I install Unreal and because i didn't find the 'Other' list early enough and cound't figure how to start it, i tried the other method making the main folder eaxtracted too the source of the program, i found the 'Other' list after this, and now when i click on the application i get "invalid command line" i tred searching for a solution but im still <clipped message>

12:33 <DC-IRC> <quantibility> stuck. Can anyone help?

12:55 <DC-IRC> <foutkassir> thanks for help, well I do still get this wifi error. checking

12:55 <DC-IRC> <foutkassir> ```that is the output of lshw -C network

12:55 <DC-IRC> <foutkassir> ```

12:55 <DC-IRC> <foutkassir> *-network:0 DISABLED

12:55 <DC-IRC> <foutkassir> description: Wireless interface

12:55 <DC-IRC> <foutkassir> physical id: c

12:55 <DC-IRC> <foutkassir> bus info: mmc@1:0001:1

12:55 <DC-IRC> <foutkassir> logical name: wlan0

12:55 <DC-IRC> <foutkassir> serial: 36:fd:09:8a:2a:45

12:55 <DC-IRC> <foutkassir> capabilities: ethernet physical wireless

12:55 <DC-IRC> <foutkassir> configuration: broadcast=yes driver=xradio_wlan driverversion=5.3.5+ firmware=N/A link=no multicast=yes wireless=IEEE 802.11

12:55 <DC-IRC> <foutkassir> ```

12:55 <DC-IRC> <foutkassir> I tried this sudo modprobe -r xradio_wlan I do get this modprobe: FATAL: Module xradio_wlan is in use.

12:55 <DC-IRC> <foutkassir> ```

12:55 <DC-IRC> <foutkassir> rfkill list

12:56 <DC-IRC> <foutkassir> I don't see anything related to this xradio_wlan driver

12:56 <DC-IRC> <foutkassir> ```

12:56 <DC-IRC> <foutkassir> 0: phy0: Wireless LAN

12:56 <DC-IRC> <foutkassir> Soft blocked: no

12:56 <DC-IRC> <foutkassir> Hard blocked: no

12:56 <DC-IRC> <foutkassir> ```

13:00 <archetech> clear out w/e youve done and start fresh with wireless basics lots of blogs/wikis around for that

13:01 <DC-IRC> <tenkawa42> xr819 is a tough one....

13:01 <DC-IRC> <tenkawa42> I did some work on this

13:02 <DC-IRC> <tenkawa42> @foutkassir what kernel version is this?

13:03 <archetech> ya some chips arent worth the troubel vs using a good linux usb stick modem

13:03 <DC-IRC> <foutkassir> I am about to throw it in the trash 🙂 just trying not to give up

13:04 <DC-IRC> <foutkassir> 5.15.93

13:04 <DC-IRC> <tenkawa42> Ok yeah thats the one (5.15) I got it working on the last Allwinner board with

13:04 <DC-IRC> <tenkawa42> Its been a while though

13:05 <DC-IRC> <tenkawa42> It needed a dts chanfe

13:05 <DC-IRC> <tenkawa42> It needed a dts change

13:05 <DC-IRC> <foutkassir> Mmmm do you have any good resource for that ?

13:08 <DC-IRC> <tenkawa42> Unfortunately I'd have to dig to find it

13:08 <DC-IRC> <tenkawa42> I did this updating months ago

13:08 <DC-IRC> <tenkawa42> For a TVbox device using that chip

13:47 <DC-IRC> <quantibility> anyone for my problem?

15:01 <DC-IRC> <foutkassir> no worries

15:01 <DC-IRC> <foutkassir> the issue is that it's loaded that xradio

15:01 <DC-IRC> <foutkassir> ```

15:01 <DC-IRC> <foutkassir> sudo modprobe -r xradio_wlan.ko

15:01 <DC-IRC> <foutkassir> modprobe: FATAL: Module xradio_wlan.ko not found.

15:01 <DC-IRC> <foutkassir> ```

15:02 <DC-IRC> <foutkassir> the issue is that it's loaded that xradio

15:02 <DC-IRC> <foutkassir> ```

15:02 <DC-IRC> <foutkassir> rmmod xradio_wlan.ko

15:02 <DC-IRC> <foutkassir> rmmod: ERROR: Module xradio_wlan is in use

15:02 <DC-IRC> <foutkassir> ```

15:02 <DC-IRC> <foutkassir> tried to do

15:02 <DC-IRC> <foutkassir> ```

15:02 <DC-IRC> <foutkassir> insmod xradio_wlan.ko

15:02 <DC-IRC> <foutkassir> insmod: ERROR: could not insert module xradio_wlan.ko: File exists

15:02 <DC-IRC> <foutkassir> ```

15:03 <DC-IRC> <foutkassir> check wpa_supplicant I can see the following

15:03 <DC-IRC> <foutkassir> ```

15:03 <DC-IRC> <foutkassir> wpa_supplicant[479]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0

15:03 <DC-IRC> <foutkassir> wpa_supplicant[479]: Could not set interface wlan0 flags (UP): Invalid argument

15:03 <DC-IRC> <foutkassir> wpa_supplicant[479]: WEXT: Could not set interface 'wlan0' UP

15:03 <DC-IRC> <foutkassir> wpa_supplicant[479]: wlan0: Failed to initialize driver interface

15:03 <DC-IRC> <foutkassir> wpa_supplicant[479]: Could not set interface wlan0 flags (UP): Invalid argument

15:03 <DC-IRC> <foutkassir> wpa_supplicant[479]: nl80211: Could not set interface 'wlan0' UP

15:03 <DC-IRC> <foutkassir> ```

15:04 <DC-IRC> <foutkassir> just wondering what did change I did change power supply to use my 5V 3A adapter but that sounds weird – module is loaded, firware is there but I cannot see it from rfkill neither ifconfig

15:05 <DC-IRC> <foutkassir> the issue is that it's loaded the xradio

15:05 <DC-IRC> <foutkassir> ```

15:05 <DC-IRC> <foutkassir> rmmod xradio_wlan.ko

15:05 <DC-IRC> <foutkassir> rmmod: ERROR: Module xradio_wlan is in use

15:05 <DC-IRC> <foutkassir> ```

15:13 <DC-IRC> <tenkawa42> @foutkassir it loaded the xradio_wlan "module".. that doesn't necessarily mean it is loadig the device itself...

15:13 <DC-IRC> <foutkassir> ah I see thanks for clarification

15:13 <DC-IRC> <tenkawa42> @foutkassir it loaded the xradio_wlan "module".. that doesn't necessarily mean it is loading the device itself...which it sounds like it does not successfully do from the invalid arguments

15:14 <DC-IRC> <tenkawa42> If I remember correctly this was one of the problemds I was having too

15:14 <DC-IRC> <tenkawa42> If I remember correctly this was one of the problems I was having too

15:15 <DC-IRC> <tenkawa42> I can't do it until tomorrow but I'll get that hardware out and see what is configured

15:15 <DC-IRC> <tenkawa42> (Not at the location)

15:16 <DC-IRC> <foutkassir> No problem thanks alot for help and explanation

15:16 <DC-IRC> <tenkawa42> np

15:16 <DC-IRC> <foutkassir> well appreciated

15:16 <DC-IRC> <tenkawa42> Once it got going it ran fairly well..

15:16 <DC-IRC> <tenkawa42> (at least on this device)