00:31 <pulpoff> Hi to all

00:31 <pulpoff> anyone running armbian on GT King ? S922x ?

00:31 <pulpoff> need some help fixing wifi drivers ..

00:31 <pulpoff> mainline kernel

00:31 <pulpoff> dmsg log :

00:31 <pulpoff> [ 11.796609] brcmfmac: brcmf_sdiod_sgtable_alloc: !!!! WIFI DEBUG azw,gtking: host->max_segs: 1 host->max_seg_size: 3 host->max_blk_cou

00:31 <pulpoff> nt: 1536 sdiodev->max_request_size: 1536 sdiodev->max_segment_count: 1 max_blocks: 3 host->max_req_size: 1536

00:31 <pulpoff> [ 11.796825] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43752-sdio for chip BCM43752/2

00:31 <pulpoff> [ 11.827549] usbcore: registered new interface driver brcmfmac

00:31 <pulpoff> [ 11.835915] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43752-sdio.azw,gtking.bin failed with error -2

00:31 <pulpoff> [ 11.835995] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43752-sdio.bin failed with error -2

01:09 <[TheBug]> pulpoff: We do not directly support TV Box , your best bet would be to post on the tv box community on the forum and ask others there for help

01:41 <pulpoff> thanks, np

02:06 <c0rnelius> Pretty sure error -2 means the firmware is actually missing.

02:20 <lanefu> Good point

02:21 <lanefu> Look in GitHub.com/armbian/firmware and see if it's in our collection

02:30 <c0rnelius> I see a mentioning of it -> https://patchwork.kernel.org/project/linux-wireless/patch/20210812165218.2508258-2-angus@akkea.ca/

02:30 <c0rnelius> Can't actually located the firmware its self on line though

02:30 <c0rnelius> Must be in cypress somewhere.

02:30 <pulpoff> i already found out a bit about issue

02:30 <pulpoff> its a new firmware for new device

02:30 <c0rnelius> located/locate*

02:30 <pulpoff> so it was missing

02:30 <pulpoff> chewitt just posted it

02:31 <pulpoff> https://github.com/chewitt/brcmfmac_sdio-firmware/commit/211cfabf400a7fc2f87714869fa1efa8db656f99

02:31 <pulpoff> gt king have a new revisions, hw is different.

06:52 <Armbian-Discord> <I​gorPec> https://forum.armbian.com/topic/16976-status-of-armbian-on-tv-boxes-please-read-first

10:14 <Miouyouyou> Meow

10:35 <Armbian-Discord> <I​gorPec> hey

12:09 <keesj> Armbian-Discord: lsof might give you a hint of what process is using what (also ps as --forest might help you understand what the system is doing)

13:37 <Armbian-Discord> <a​rianaglande> btw how do i make armbian install the os inside the internal flash of the tablet?

14:01 <lanefu> Honestly DDing is probably safest.

14:01 <lanefu> Also /usr/sbin/nand-sata-install

14:23 <Armbian-Discord> <a​rianaglande> Oh nice :)

14:23 <Armbian-Discord> <a​rianaglande> can you explain me that tho

14:23 <Armbian-Discord> <a​rianaglande> On Allwinner devices after switching to boot from NAND or eMMC clearing the boot loader signature on the SD card is recommended: dd if=/dev/zero of=/dev/mmcblkN bs=1024 seek=8 count=1 (replace /dev/mmcblkN with the correct device node – in case you run this directly after nand-sata-install without a reboot in between then it’s /dev/mmcblk0). When booting from eMMC to get SD cards auto-detected on Allwinner

14:23 <Armbian-Discord> legacy images please consider changing mmc0‘s sdc_detmode from 3 to 1 in the board’s fex file (see here for details).

14:26 <Armbian-Discord> <l​anefu> Boot precedence always goes to sdcard on allwinner devices

14:27 <Armbian-Discord> <l​anefu> So if you leave one in the slot for storage purposes it can. Stop you from booting. But also I don't understand the second half lol

14:27 <Armbian-Discord> <l​anefu> Also you have the best nick

14:30 <Armbian-Discord> <a​rianaglande> 😂😂

14:30 <Armbian-Discord> <a​rianaglande> well... i want it to be like that so no problem 😁

14:30 <Armbian-Discord> <a​rianaglande> apparently i can ignore that part

14:31 <Armbian-Discord> <a​rianaglande> also is it possible to display something on the tablet’s screen?

14:31 <Armbian-Discord> <a​rianaglande> for now the tablet’s display doesnt even backlight and only outputs via hdmi

14:45 <Armbian-Discord> <a​rianaglande> @lanefu wait... i ran nand-sata-install but it just asked me if i wanted to update the bootloader

14:45 <Armbian-Discord> <a​rianaglande> it didnt copy the fs

16:25 <Armbian-Discord> <T​onymac32> https://ameridroid.com/collections/single-board-computer/products/atomic-pi

16:25 <Armbian-Discord> <T​onymac32> hmmmm

16:29 <Armbian-Discord> <T​onymac32> in case anyone is interested in those, the sale price seems ok

16:50 <Armbian-Discord> <l​anefu> remember you still need a power BOARD of some sort to drive the Atomic Pi

16:53 <Armbian-Discord> <l​anefu> I built a power board from this dudes design using scraps and it woked well https://www.reddit.com/r/Atomic_Pi/comments/bp0hvt/comment/eprnx34/?utm_source=reddit&utm_medium=web2x&context=3

16:54 <Armbian-Discord> <T​onymac32> good call, I'm not getting one since I don't have any use for yet another SBC, unless I want to take my actual server offline to save power

16:55 <Armbian-Discord> <T​onymac32> (plex transcoding should work on that little guy for a stream or two I would assume)

16:58 <Armbian-Discord> <l​anefu> i still acn't get clear confirmation on whether or not they support intel Quick Sync

16:58 <Armbian-Discord> <l​anefu> i've got 2, so i'll get one online and let you investigate

16:58 <Armbian-Discord> <l​anefu> at an underdetermined time in the future

17:04 <c0rnelius> They were selling them for $40 on amazon that came with the power attachment and camera. Not sure if they still are? I bought one a whiles back I use as a NAS/Deluge server.

17:05 <c0rnelius> If you plan to hook any USB stuff to it you'll def need a usb powered hub.

17:07 <lanefu> likebest thing about it you can tell people you have a robot heart

17:17 <Armbian-Discord> <T​onymac32> why would I get that when I've got my eye on this Rock3 B Pico-ITX board (apologize if names are incorrect in some respect)

17:18 <Armbian-Discord> <T​onymac32> lol I was thinking of ordering one of those handhelds and some other stuff from Hardkernel, but, uh, I had a $70 shopping cart and an $85 shipping estimate 😄

19:48 <Armbian-Discord> <l​anefu> Exactly

19:48 <Armbian-Discord> <l​anefu> Atomic pi has come and gone

19:48 <Armbian-Discord> <l​anefu> Unless you want to

19:48 <Armbian-Discord> <l​anefu> Build a talking robot

19:48 <Armbian-Discord> <l​anefu> Good for that

19:49 <Armbian-Discord> <l​anefu> Best SBC for that

20:06 <[TheBug]> I actually have 2 atompis in VESA mounted setups on back of monitors, one with windows on it and used by my niece for doing school and other I have on my desk as a back-up linux workstation

20:06 <[TheBug]> they are not too bad for light work

20:23 <lanefu> I used 1 as a desktop with mate for a while

20:23 <lanefu> I tried and tried but I couldn't outsmart the 2gig of RAM

20:27 <[TheBug]> yeah memory is biggest downfall on that platform in general, with tablets included

20:28 <[TheBug]> most were only manufactured with 2GB, there are a few 4 GB implementations out there, I think such as RockPi X but not as many as 2GB

20:42 <stipa> there's that

20:43 <stipa> buZz: linked it

20:43 <stipa> arm with 8 cores and 16 gigs

20:43 <stipa> preorder

20:43 <stipa> around 600 $

20:44 <stipa> Phytium D2000

20:44 <stipa> https://linuxgizmos.com/compact-529-desktop-runs-linux-on-octa-core-arm-soc/

20:46 <stipa> seems like ARM workstation won't be possible without fans

20:47 <stipa> thy're bigger and bigger as power of calculations go up

20:47 <stipa> goes*

21:11 <lanefu> Yeah was like $620 after tax and shipping

21:12 <lanefu> I wish it had displayport instead of HDMI

21:12 <lanefu> I'm sure I'm a minority on that front

21:13 <stipa> yeah, more video outs wouldn't hurt anyone

21:13 <stipa> rx550 is capable of three

21:14 <lanefu> I think they were trying to mange costs

21:14 <stipa> yeah, the cpu is probably like 90% of the price

21:15 <stipa> but additional two ports wouldn't break a bank

21:16 <stipa> running linux with one monitor is just a joke

21:17 <stipa> like, linux workstation

21:24 <[TheBug]> yeah that was my comment on it -- for a usable workstation for me it needs at least dual output -- right now as sad as I am to admit, the RPi 4 is doing that job 'decently'

21:24 <[TheBug]> though I use it more as a 'thin terminal'

21:28 <lanefu> Yeah they're not selling it as a "workstation"

21:35 <stipa> yeah, they're selling it as ""

21:35 <stipa> "Compact"

21:45 <Armbian-Discord> <d​ro3m> how long does it normally take to compile the kernel on a rock pi 4b?

21:55 <[TheBug]> Longer than you want and less time than you expect.

21:56 <[TheBug]> s/and/but

21:56 <ArmbianHelper> [TheBug] meant to say: Longer than you want but less time than you expect.

21:58 <Armbian-Discord> <N​eonFetch> 1 or 2 hrs

21:58 <Armbian-Discord> <N​eonFetch> Not more than that

21:58 <Armbian-Discord> <N​eonFetch> Maybe less, depending on clock speeds

21:58 <Armbian-Discord> <a​rianaglande> guys where can i find the script.bin file?

21:59 <Armbian-Discord> <a​rianaglande> it's not inside the boot folder

21:59 <[TheBug]> haha see

21:59 <[TheBug]> you said the same thing in a more complicated way

21:59 <[TheBug]> lol

22:02 <Armbian-Discord> <d​ro3m> ah that’s not to bad actually

22:03 <Armbian-Discord> <N​eonFetch> Use all cores

22:04 <Armbian-Discord> <N​eonFetch> Or just two if you are worried about temps

22:04 <[TheBug]> or put a fan on it!

22:04 <[TheBug]> lol

22:04 <[TheBug]> heatsink +fan works awesome on rk3399

22:04 <Armbian-Discord> <N​eonFetch> Yes, I think the best one is the one for the rockpro64

22:05 <[TheBug]> can run it at full clocks at <45c

22:05 <Armbian-Discord> <N​eonFetch> Thst one works amazingly

22:05 <Armbian-Discord> <N​eonFetch> I use 2.21/1.8 on the rockpro64

22:05 <[TheBug]> yeah I use 30mmx30mm 5v fan and heatsink

22:05 <[TheBug]> on RockPI 4c

22:05 <[TheBug]> I do use the provided heatsink w/ fan from pine though for RockPro64

22:06 <[TheBug]> and I like it a lot as well

22:06 <Armbian-Discord> <N​eonFetch> I just set it to spinn all time but at very slow rpms

22:07 <Armbian-Discord> <N​eonFetch> It doesnt make any sound, and works perfectly

22:07 <[TheBug]> yeah mine are in ATX cases so I did pretty much the same

22:07 <[TheBug]> cause there are many case fans around it

22:07 <[TheBug]> just want enough to make sure it has some direct flow

22:07 <[TheBug]> Have on running 10x3TB raid5

22:07 <[TheBug]> other running 6x2TB raid5

22:07 <[TheBug]> they are beasts

22:08 <Armbian-Discord> <d​ro3m> i am, i also have the ecopi pro case so temps should be fine

22:09 <Armbian-Discord> <N​eonFetch> It probably take just 1 hr

22:09 <Armbian-Discord> <N​eonFetch> A bit more or less then

22:10 <Armbian-Discord> <N​eonFetch> I compiled kernels on rpi3

22:10 <Armbian-Discord> <a​rianaglande> is it possible to get legacy versions for the a10 soc?

22:10 <Armbian-Discord> <N​eonFetch> I conpiled 0AD on rpi3

22:10 <Armbian-Discord> <a​rianaglande> on armbian website i can only find mainline

22:11 <Armbian-Discord> <a​rianaglande> tho script.bin is only on legacy versions

22:24 <Armbian-Discord> <l​anefu> @arianaglande yeah https://github.com/armbian/build/blob/master/config/boards/cubieboard.conf

22:25 <Armbian-Discord> <l​anefu> So probably still just sunxi-legacy