<uvos>
mighty17[m]: no those patches have no change of inclusion in the mainline kernel as is so are not of "sufficant quality"
<uvos>
mighty17[m]: for instance you need to split "Added espresso" into patch with the mms114 changes and a patch with the dtsi and a patch with the defconfig changes
<mighty17[m]>
<uvos "mighty17: for instance you need "> for the patches yes, each one will have a seperate .patch file, i thought u meant the code quality
<uvos>
also please add whatever extra modules you device needs to omap2_defconfig
<uvos>
instead of addin a new one
<uvos>
so we need
<mighty17[m]>
<uvos "shunt-resistor-micro-ohms = <240"> that will get removed anyways, light sensor isnt working somehow
<uvos>
a branch with the: Input: mms114 - Support MMS136 patch as applied to the mainline tree backported to 5.11, a patch that adds the dts and a patch that adds the needed modules to omap2_defconfig
<uvos>
and $subject, passing check_patch script and long form description for all of them
<mighty17[m]>
i can get a mms136 patch as well, that way the tree is clean
<mighty17[m]>
also my defconfig is loosely based on omap2plus so that should be easy
<uvos>
yeah just diff it and add whatever you added as =m to the omap2plus one
<mighty17[m]>
okay!
<uvos>
we need to be able to build a signle kernel with support for all our devices, ie we need it in one defconfig
diejuse has quit [Quit: Leaving.]
<uvos>
great work btw :)
diejuse has joined #maemo-leste
<diejuse>
any way to keep portrait mode both when I enter and when I exit the apps? I am testing MLeste on a blackberry and when I put a screen resolution with width higher than width it crashes.
<diejuse>
*width higher than height
<diejuse>
*height higher than width, pardon
<uvos>
by brain also crashes wen you try usign a screen resolution with width higher than width
<freemangordon>
uvos: Wizzup: I think I have a reliable way of repro the "no saved connections available" bug in the VM, which I think is the same as "never succeeds until you close dialog and start over"
<freemangordon>
when connecting from easy-wlan dialog, just enter wrong ssid of a hidden AP, so it will fail (assuming the patch ^^^), Then try to connect to some saved connection from the same dialog: "no saved..."
<mighty17[m]>
<uvos "we need to be able to build a si"> wont the kernel get too big, or are we just gonna use =m?
<uvos>
mighty17[m]: =m ofc
<diejuse>
uvos: my only solution is to put an almost square resolution with a pixel more width than height. On the Titan mobile it is perfect but on other mobiles it is not suitable.
<mighty17[m]>
that'll need quite some work then on my end
<uvos>
diejuse: you can make it stay portrait by chainging /usr/share/hildon-desktop/trainsition.ini
<uvos>
i dont recall what the flag is called exacly
<mighty17[m]>
why isnt PREEMPT enabled in omap2plus, thats necessary for powervr afaik
<uvos>
but its something like force protraitable
<uvos>
mighty17[m]: because the pvr branch changes that ofc
<mighty17[m]>
so should i include it in my patch or nor
<mighty17[m]>
not*
<uvos>
no
<uvos>
your patches must be appropriate for mainline kernel
<mighty17[m]>
cool thanks :D
<uvos>
any pvr stuff at all or support changes for pvr are not welcome
<mighty17[m]>
`CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"` will need to be changed ig this is for uart in omap2plus
<uvos>
hmm ok
<uvos>
you have no way of not forcing the cmdline
<uvos>
?
<diejuse>
uvos: I'm going to try it
<uvos>
stting CONFIG_CMDLINE if ofc not acceptable in the common kernel
<mighty17[m]>
what other way?
<mighty17[m]>
i used to use `CONFIG_CMDLINE="console=tty0 ignore_loglevel" `
<uvos>
right you set the cmdline in kconfig
<uvos>
thats a problem since it would break the other devices
<uvos>
the other devices get cmdline from the bootloader
<uvos>
i gues this might be a sticking point
<uvos>
i assume your bootloader dosent let you change the cmdline...
<mighty17[m]>
i guess so
<mighty17[m]>
been a while since i tried something non pmOS
<uvos>
well i gues you could have a initramfs that mounts root
<uvos>
and otherwise no cmdline
<Wizzup>
freemangordon: that sounds like the same bug yeah
<uvos>
not ideal
<uvos>
or you could boot kexecboot first
<Wizzup>
uvos: that looks great @ libsdl12-compat
<uvos>
and then have a bootloader that allows you to change cmdline (and multiboot)
<mighty17[m]>
<uvos "or you could boot kexecboot firs"> i dont think i have kexecboot
<uvos>
mighty17[m]: right
<uvos>
mighty17[m]: i gues this would be easiest
<mighty17[m]>
yes
<uvos>
and then you can have boot pmos and leste installed ;)
<uvos>
s/boot/
<Wizzup>
diejuse: regarding portrait mode when entering and exiting apps, I am not sure at the moment, what exactly are you seeing?
<Wizzup>
uvos: btw, does BP also crash for you when you click 'practice'
<uvos>
mighty17[m]: you could flash that image to sdcard or some partiton on the device that it dosent need
<mighty17[m]>
<uvos "and then you can have boot pmos "> i mean yes, but lets try with no cmdline and hope bootloader sets it, afaik in downstream it sets it to some werid thing
<uvos>
mighty17[m]: and then compile a kernel that sits in boot with a forced cmdline to boot that partition
<mighty17[m]>
<uvos "mighty17: you could flash that i"> yeah!!
<mighty17[m]>
best way :D
belcher_ is now known as belcher
<uvos>
and then you have a real bootloader that can set cmdline and stuch
<uvos>
"real"
<mighty17[m]>
xD
<uvos>
android bootloaders are annoying :(
<mighty17[m]>
indeed :(
<mighty17[m]>
i also need `CONFIG_B43` for wifi/bt
<mighty17[m]>
bcm4330
<uvos>
mighty17[m]: sure add whatever modules you need to omap2plus
<dreamer>
every except Cargo comes with latest MW it seems hehe
<parazyd>
ok
<parazyd>
I'll try to get around to it tonight if I can
<dreamer>
thnx!
<dreamer>
was just preparing by reading some docs
<dreamer>
would be nice to make a first version with this this month
<dreamer>
so the frontpage can have a table instead of link to `Category:Device`
<parazyd>
++
pere has quit [Ping timeout: 272 seconds]
diejuse has quit [Ping timeout: 272 seconds]
<Wizzup>
parazyd: dreamer: thanks
diejuse has joined #maemo-leste
diejuse has quit [Quit: Leaving.]
pere has joined #maemo-leste
R0b0t1``` has quit [Read error: Connection reset by peer]
R0b0t1 has quit [Ping timeout: 264 seconds]
R0b0t1 has joined #maemo-leste
gordon2 has quit [Quit: WeeChat 3.1]
diejuse has joined #maemo-leste
<diejuse>
uvos Wizzup: I've been testing and there are no crashes with Xephyr. I get to rotate using "xrandr" from osso-xterm but when I click on the top left corner Hildon desktop returns to landscape mode.
<diejuse>
Now that xrandr is not a problem, I need to find some way to put Hildon desktop in portrait mode.
<uvos>
diejuse: you need to turn off rotation in android
<uvos>
and get the accelerometer to mce somehow
<diejuse>
uvos: Android rotation is off
<uvos>
diejuse: right so now you need to get the accel to mce
<uvos>
diejuse: if your kernel provides the sensor as a iio device this is easy
<uvos>
you just need to install iio-sensor-proxy
<uvos>
and load the iio-accelerometer mce module
<uvos>
and you need to have /dev/ mounted in the chroot
<uvos>
but remove everthing except the ModuleDevice line
<diejuse>
uvos: I am going to try. The Blackberry community will appreciate this if I am successful. It is a very closed phone and they are very enthusiastic about the news. hehe
inky has quit [Ping timeout: 245 seconds]
inky_ has joined #maemo-leste
_inky has quit [Ping timeout: 245 seconds]
<diejuse>
uvos: I have error when mounting /sys. In any case Maemo accel seems working because screen is inverted when rotating it (with Android rotate off).
Daanct12 has joined #maemo-leste
Daanct12 has quit [Changing host]
Daanct12 has joined #maemo-leste
<parazyd>
Updated d4/bionic kernel in -devel. Let me know if there are issues.
Danct12 has quit [Ping timeout: 268 seconds]
inky has joined #maemo-leste
<diejuse>
uvos: I have added some applications to portrait mode whitelist and works. If I launch apps from terminal they are opened in portrait mode. Problem is when I exit to home, landscape mode is back.
<Wizzup>
parazyd: ok, will try in a bit @ kernel
<parazyd>
Cool :)
<parazyd>
Prep for 2k package updates :D
<Wizzup>
hehe
<Wizzup>
I'll look at the locale.gen stuff later today, after my work mtgs
<parazyd>
Appreciate it. lmk if you need a hand on the apt side
Daaanct12 has joined #maemo-leste
Daaanct12 has quit [Changing host]
Daaanct12 has joined #maemo-leste
Daanct12 has quit [Ping timeout: 272 seconds]
Daaanct12 has quit [Client Quit]
Danct12 has joined #maemo-leste
diejuse has quit [Quit: Leaving.]
Pali has joined #maemo-leste
Twig has joined #maemo-leste
diejuse has joined #maemo-leste
Twig has quit [Ping timeout: 244 seconds]
<Pali>
freemangordon: Hi!
Twig has joined #maemo-leste
<Pali>
I would like to know if you had some time to look at usb part of n900 u-boot...
<uvos>
parazyd: you dident add the discussed changes for fixing usb plugged in boot right?
<Wizzup>
parazyd: did the kernel build? I think I pulled it but it says 5.11.22
<Wizzup>
not 5.13 or so
<uvos>
should be 5.11.22
inky_ has quit [Read error: Connection reset by peer]
<uvos>
why would you expect 5.13 the xorg problem is still in place
inky has quit [Read error: Connection reset by peer]
inky_ has joined #maemo-leste
<Wizzup>
uvos: sorry, what xorg problem are you talking about?
<uvos>
the latter together with cmdline changes works around the problem with the device hanging if you boot with usb plugged in and the former fixes the d4 randomly ideling at 300mw (maybe hopefully hasend happend to me since)
<Wizzup>
uvos: ok, weird that I missed that entirely wrt ddk 1.9
<parazyd>
uvos: Will do
* parazyd
bbl
uvos has quit [Remote host closed the connection]
uvos has joined #maemo-leste
<uvos>
Wizzup: vat? we even made the descission to stick with 5.10 lts for stable, for this reason, together.
<Wizzup>
uvos: hrm
inky has joined #maemo-leste
<diejuse>
uvos Wizzup: portraid mode works finally! :D
<uvos>
diejuse: great
<uvos>
did you get iio-sensor-proxy to work?
<diejuse>
uvos: I created the mce.ini.d file
<diejuse>
and "dbus-send --system --type=signal /com/nokia/mce/signal com.nokia.mce.signal.sig_device_orientation_ind string:'portrait' "
<diejuse>
result: works
<uvos>
yeah sure that works, but its not right
<uvos>
start monitor-sensor in terminal
<uvos>
and see if it reports any sensors
<uvos>
if they are sensor orientation values wrong you have to add a rotation matrix to your udev files
<uvos>
look at the leste-config for the bionic on how to do this
<diejuse>
uvos: ok, I take note
<diejuse>
at the moment It works very well. I'm more impressed to see it work on my Blackberry Key1 than on my Titan.
diejuse has quit [Quit: Leaving.]
Twiggy has joined #maemo-leste
_inky has joined #maemo-leste
inky_ has quit [Ping timeout: 252 seconds]
inky has quit [Ping timeout: 272 seconds]
inky has joined #maemo-leste
inky has quit [Client Quit]
inky has joined #maemo-leste
Twiggy has quit [Remote host closed the connection]
<freemangordon>
Pali: no, sorry :(. I will do my best to find some the next week.
<Pali>
ok!
<Wizzup>
freemangordon: I brought my n900 serial with me, and the lab psu should arrive on wednesday, so I could do some testing for you later next week if required
<freemangordon>
ok, thanks
inky has quit [Read error: Connection reset by peer]
inky has joined #maemo-leste
diejuse has joined #maemo-leste
<parazyd>
uvos: Is the patch fine for both 5.11 and 5.10?
<uvos>
parazyd: should be fine
<uvos>
but i did not try
<uvos>
maybe just apply to devel for now.
<parazyd>
ok
<uvos>
Wizzup: where you at? if i may ask
<parazyd>
I didn't update the 5.10 yet
Twig has quit [Ping timeout: 265 seconds]
<Wizzup>
uvos: currently in rijeka (city) with my gf, but going to korcula (island)
<uvos>
Wizzup: nice :)
<uvos>
Wizzup: brining along the lab supply is dedication :P