11:02 <_florent_> r4d10n[m]1: good. Regarding the LiteDRAM issue, this has been fixed with https://github.com/enjoy-digital/litedram/commit/e5e3b6c9a3f9108e2db63ce21f111fe131199878

11:03 <_florent_> r4d10n[m]1: Regarding litex_term, I'll have a closer look, but to avoid --safe mode and speed up transfer, you can also try to modify min_delay here: https://github.com/enjoy-digital/litex/blob/master/litex/tools/litex_term.py#L372

11:03 <_florent_> r4d10n[m]1: and set it to 1e-4 or 1e-3

11:05 <_florent_> For those who were using JTAG-UART/JTAGBone on ECP5 and confused by the additional --jtag-chain=49 command; this is no longer required with https://github.com/enjoy-digital/litex/commit/cb13f71b5611e5f4c66ad2e4cc9f4e743ffaa4b4

17:39 <r4d10n[m]1> _florent_: changing the m2 slot moved the upload % to around 18% before getting stuck... will play with min_delay...

19:45 <somlo> _florent_: any recommendations on which SATA disks are likely to generate the least "friction" when used with LiteSATA ? :)

19:48 <somlo> I'm on amazon trying to order something right now, and there's a never ending list of complaints about sector sizes vs. uefi firmware incompatibilities, SSDs dying after two weeks, and so on -- so if people are having that much trouble interacting with "standard" hardware, my chances of hitting some weird corner case by just ordering a random disk are likely high...

21:04 <_florent_> somlo: I never had issues with a specific brand, I would say just avoid cheap one and get a Kingston or Samsung

21:34 <somlo> ssd vs. spinning rust an issue at all?

21:44 <_florent_> spinning will also work but will be slow/noisy