<norayr> Wizzup, i did the issue yesterday
<norayr> Everyone - i am able to configure xorg.conf to get a picture on a motorola lapdock screen.
<norayr> Both with startx (where i get windowmaker) and with normal boon when i get hildon on the lapdock screen.
<norayr> But keyboard doesn't work in xorg nor in plain console. Also mouse.
<norayr> xinput doesn't list lapdock devices.
<norayr> I suspect kernel doesn't have usb hub related modules or something enabled.
<norayr> though i see /dev/input/mouse0 and /dev/input/mouse1
<norayr> but when i use mouse1 in xorg config nothing changes. And keyboard doesn't work without X as well.
Pali has quit [Ping timeout: 265 seconds]
xmn has joined #maemo-leste
uvos__ has quit [Ping timeout: 244 seconds]
uvos__ has joined #maemo-leste
xmn has quit [Ping timeout: 265 seconds]
joerg has quit [Ping timeout: 265 seconds]
joerg has joined #maemo-leste
macros_ has quit [Ping timeout: 250 seconds]
macros_ has joined #maemo-leste
<freemangordon> ugh, I forgot one patch
dev has left #maemo-leste [Disconnected: Replaced by new connection]
dev has joined #maemo-leste
dev has left #maemo-leste [#maemo-leste]
dev has joined #maemo-leste
mardy has joined #maemo-leste
Livio has joined #maemo-leste
Livio has quit [Changing host]
Livio has joined #maemo-leste
Daanct12 has joined #maemo-leste
uvos has joined #maemo-leste
vagag has joined #maemo-leste
dev has left #maemo-leste [Disconnected: Replaced by new connection]
dev has joined #maemo-leste
dev has left #maemo-leste [#maemo-leste]
dev has joined #maemo-leste
Daanct12 has quit [Ping timeout: 244 seconds]
Daanct12 has joined #maemo-leste
<Wizzup> freemangordon: you already did the ofono release, right?
Pali has joined #maemo-leste
akossh has joined #maemo-leste
<uvos> norayr: i think we disabled the cpcap usb host module
<uvos> norayr: or maybe i did that
<uvos> norayr: it uses a lot of power anyhow
<uvos> check modprobe.d
<uvos> the lapdock usb hub worked in the past for sure
<Wizzup> does it also charge in the lapdock mode?
<uvos> yes
<uvos> battery life is essentaly inf if you keep the display off
<Wizzup> what do you mean, if you keep the display off?
<uvos> lapdock + atrix 4g has extreamly long battery life, unless you run the laptop display
<uvos> that uses a lot of power ofc
<Wizzup> oh, since it also has a battery, right
<Wizzup> but if you plug it into power, it should just power the phone and give permanent battery, no?
<Wizzup> should I try to get these then? https://www.ebay.com/itm/363915670324 (I'm going to the US in a few weeks)
<uvos> sure
<uvos> yeah thats the good version
<uvos> i only have the atrix one :(
<uvos> the 500 even has vga out
<uvos> i wonder if the bridge will work ;)
<Wizzup> hehe
<uvos> if you buy 2, can i buy one off you?
<Wizzup> yeah, I'm wondering if it's better to ship it to europe
<uvos> customs concerns?
<Wizzup> yeah and shipping costs + I'm not at home atm
Daanct12 has quit [Quit: Leaving]
dev has left #maemo-leste [Disconnected: Replaced by new connection]
dev has joined #maemo-leste
<norayr> yes yes it charges from the lapdock, and lapdock has its own battery, and charges from the power.
<norayr> under android without powering the lapdock i spent hours with it, and didn't exhaust the battery.
<norayr> I'll see in the blacklisted modules
<norayr> by the way, you cannot imagine how leightweight the lapdock is.
vagag has left #maemo-leste [Error from remote client]
<uvos> i can defently imagine, i can also lift it :P
vagag has joined #maemo-leste
<uvos> what lapdock do you have
dev has left #maemo-leste [Disconnected: closed]
dev has joined #maemo-leste
<norayr> bionic lapdock
<norayr> i saw one for $4 on auction on ebay and forgot to buy it, and it is gone. then bought thin for $37 or something on amazon.
<norayr> it looks very nice too.
<norayr> having linux with me as lapdock + droid is unbelievably cool.
<norayr> and hildon works too
<norayr> i was just unable to see itn kbd and mouse with xinput
<norayr> So yes i'll see if the driver is blacklisted
vagag has left #maemo-leste [#maemo-leste]
<norayr> I was configuring x by booting to mode without x and doing startx, with wmaker in root's xinitrc, then shutting it down and reconfiguring and trying again.
<norayr> then hildon also worked with the same config.
vagag has joined #maemo-leste
<norayr> uvos, cpcap is not blacklisted
<norayr> blacklist ehci-omap
<norayr> blacklist omap_hdq
<norayr> this is what is blacklisted + bluetooth
<Wizzup> ehci-omap sounds like what you want
<norayr> oh
<norayr> what are the .conf.leste files?
<Wizzup> don't touch them
<Wizzup> they're part of what we use to distribute and update config files
<norayr> ok! do i need omap-hdq blacklisted?
<Wizzup> maybe just unblacklist both and then see if you need it
<norayr> okay!
<norayr> modprobe'd everything, still don't have the kbd or mouse working, but let me check my xorg.conf
<Wizzup> thx
Livio has quit [Ping timeout: 260 seconds]
Livio has joined #maemo-leste
Livio has quit [Changing host]
Livio has joined #maemo-leste
<Wizzup> wtf
<Wizzup> github now requires sms
<Wizzup> norayr: see invite
<Wizzup> now let me configure the rest
<Wizzup> norayr: should be all set up on jenkins
<norayr> thaaaank you!
<freemangordon> Wizzup: yes
<Wizzup> freemangordon: will test today
<freemangordon> ok
<Wizzup> norayr: did you push a tag and maemo/beowulf branch
<Wizzup> gbp:debug: ['git', 'ls-tree', '0.6']
<Wizzup> gbp:error: 0.6 is not a valid treeish
<freemangordon> Wizzup: what was next? shall I look at icd ofono code?
vagag has left #maemo-leste [#maemo-leste]
<Wizzup> freemangordon: the libicd-network-ofono? yes please, if you want to
<freemangordon> ok
<Wizzup> we need to use ofono_connctx_add_active_changed_handler and ofono_connctx_add_activate_failed_handler
<Wizzup> on registered contexts
<norayr> Wizzup thanks... the version was 0.6-5 so i thought 0.6.5 tag would be appropriate
<Wizzup> no, -5 is epoch
<Wizzup> was maemo fremantle 0.6?
<Wizzup> maybe make it 0.7
<Wizzup> and epoch -1
<Wizzup> freemangordon: fwiw my local 'notes' as code https://dpaste.com/2KJYS2WDM.txt
<Wizzup> not compile tested or anything
<norayr> ah my tag was 0.6.1
<Wizzup> anything after - is not tag
<Wizzup> so 0.6-5 requires tag 0.6
<norayr> oh, so the tag doesn't describe the package version, but the os version?
<Wizzup> for any new source changes you need to bump version not epoch (-5)
<Wizzup> hm?
<Wizzup> for any debian/* changes you can increase epoch
<norayr> shell i just do it 0.0.1?
<Wizzup> for any source changes you need to change anything before -
<Wizzup> why 0.0.1?
<Wizzup> just take the fremantle version and give it one major increase IMHO
<Wizzup> but you can go for 1.0.0 too
<norayr> ok, so...
<norayr> let me understand
<norayr> 0.6-5 is the version in the changelog, i just added +leste1
<norayr> the tag i used is 0.6.1 - and it is not good for the builder
eloy has quit [Ping timeout: 255 seconds]
<norayr> what kind of tag would be good then?
<Wizzup> I think I just explained it clearly, can you try to re-read what I wrote?
<Wizzup> sorry but I can either just tell you what to do, but I am not sure how to explain differently
<norayr> i do this rarely and forget stuff. even though i have created a local wiki page for myself.
<Wizzup> we probably need a good wiki article on it
<Wizzup> looks like you figured it out :)
<norayr> heh
<norayr> hopefully it'll build
<norayr> since i modprobed the blacklisted modules
<norayr> and commented those out (but i didn't reboot the phone)
<norayr> my xinput still sees exactly the same as before, and i think it doesn't see lapdock kbd and mouse. :/
<Wizzup> reboot the phone
<norayr> okay.
<norayr> got lots of warnings from omap-hdq during reboot.
<norayr> during shut down
eloy has joined #maemo-leste
<norayr> yay the build is done.
<norayr> after reboot, the lapdock kbd doesn't work in console, but for some reason 'caps lock' led is on.
<norayr> i went to the 'emergency' mode, without xorg.
* Wizzup afk
<norayr> may it be droid4 usb should be configured to be the host? or is it in host mode by default?
<norayr> this is my dmesg.
<norayr> it has some exceptions, not sure that relevant. also i exposed the mac of the access point, not mine, anyway.
<norayr> >(EE) evdev: Mouse2: Unable to query fd: Inappropriate ioctl for device
<norayr> it's in Xorg.0.log
eloy has quit [Ping timeout: 264 seconds]
<norayr> so i see 4a31c000.keypad - and it is apparently the droid keyboard.
<norayr> i don't see lapdock kbd. :/
<norayr> ok to be continued later
<norayr> this is my current Xorg.0.log http://dpaste.com/AUKBZLG45
* norayr afk
dev has left #maemo-leste [Disconnected: closed]
xmn has joined #maemo-leste
dev has joined #maemo-leste
eloy has joined #maemo-leste
dev has left #maemo-leste [Disconnected: Replaced by new connection]
dev has joined #maemo-leste
Livio has quit [Ping timeout: 250 seconds]
dev has left #maemo-leste [Disconnected: Replaced by new connection]
<Wizzup> freemangordon: got a glib update from devuan/debian, we do not have it forked atm yeah?
<freemangordon> I think we do
<freemangordon> libglib2.0-bin 2.58.3-2+deb10u3+leste1+2m7.1
dev has joined #maemo-leste
<Wizzup> Setting up libglib2.0-0:armhf (2.58.3-2+deb10u4) ...
<Wizzup> Setting up libglib2.0-dev-bin (2.58.3-2+deb10u4) ...
<Wizzup> Setting up libglib2.0-bin (2.58.3-2+deb10u4) ...
<Wizzup> Setting up libglib2.0-dev:armhf (2.58.3-2+deb10u4) ...
<freemangordon> mhm, have to upgrade it
<Wizzup> looks like they increased it
<Wizzup> yes
<freemangordon> I think it is "[PATCH] libcharset: Drop a redundant environment variable" that was added
dev has left #maemo-leste [Disconnected: Replaced by new connection]
dev has joined #maemo-leste
<freemangordon> also according to changelog
<freemangordon> Wizzup: I think we shall release 'our' glib asap
<freemangordon> as this affects stable users as well
<freemangordon> shall I do it?
dev has left #maemo-leste [#maemo-leste]
<freemangordon> I will do it, I still have my glib tree around
<Wizzup> yes pls, I am not at my laptop
<Wizzup> norayr: how do I het dictionaries in mstardict?
Twig has joined #maemo-leste
dev has joined #maemo-leste
Danct12 has quit [Remote host closed the connection]
Danct12 has joined #maemo-leste
Daanct12 has joined #maemo-leste
Danct12 has quit [Ping timeout: 265 seconds]
<norayr> Wizzup, put the dictionaries to ~/MyDocs/mstardict
<norayr> and they will be found
<norayr> i already enjoy using it. (:
<freemangordon> Wizzup: both VM and d4 survived a reboot after glib upgrade, going to push to -stable
<norayr> i need to also write a wiki page about it.
<norayr> i'll do
Livio has joined #maemo-leste
Livio has quit [Changing host]
Livio has joined #maemo-leste
Livio has quit [Ping timeout: 265 seconds]
<freemangordon> I would expect we shall set whatever needed on inactive context
<freemangordon> and is *only* if needed, like manual set
<freemangordon> do I miss something?
<freemangordon> oh, is that some DNS hack?
<norayr> folks i think the kernel is the problem
<norayr> keyboard doesn't work in console, and i have no input device for it.
<Wizzup> freemangordon: not on laptop atm, but yes, there is ip-dns hack
<Wizzup> ip/dns
<norayr> is there some other kernel i might try to confirm?
<freemangordon> Wizzup: why is it needed? dns is set-up by the MNO, no?
* freemangordon checks what shall happen
elastic_dog has quit [Ping timeout: 250 seconds]
<Wizzup> freemangordon: mno?
<Wizzup> the next module is ipv4
<freemangordon> Mobile Network Operator
<Wizzup> and this reads it from gconf
<freemangordon> no
<Wizzup> not on our local iface
<freemangordon> it depends what is set on iap level, sec
<Wizzup> oh dns specifically
<Wizzup> I meant ip
<freemangordon> the same for dns
<Wizzup> will try to open from d4
<freemangordon> no, don;t, I will try to make it work according to my understanding
<Wizzup> ok
<Wizzup> so the line 97 stuff is simple to have next module set ip
<Wizzup> on fremantle the cellular one sets its own ip I think
<freemangordon> ofono does the same
<Wizzup> since it does not call ipv4 at all in module chain
<Wizzup> no
<freemangordon> ah
<freemangordon> well, yes
<Wizzup> ofono just suggests it on dbus
<freemangordon> right
<Wizzup> it does not set it up
<Wizzup> so this just passes along ofono info as 'static ip info'
<freemangordon> right, but we can call dhcp on the interface
<Wizzup> which is a hack
<Wizzup> dhcp won't always work I think?
<freemangordon> why is that?
elastic_dog has joined #maemo-leste
<freemangordon> see /usr/share/ofono/scripts/process-context-settings
<freemangordon> there is "method" think it seems
<freemangordon> if it is "dhcp" we shall run dhcp over the iface
<freemangordon> *thing
<freemangordon> ok, I think I got it
<Wizzup> yes
<Wizzup> agreed
<Wizzup> this will also solve buZz's problem
<freemangordon> mhm
<freemangordon> also, shall I deactivate first if in link_up it is active?
<freemangordon> I think yes, but not sure why :)
<norayr> aaaand, lsusb output doesn't change when i connect the dock.
<norayr> wait, may it be that if it gets the charge, it cannot also be usb host at the same time?
<Wizzup> freemangordon: hm, maybe, doesn't icd call link down?
Livio has joined #maemo-leste
Livio has quit [Changing host]
Livio has joined #maemo-leste
<freemangordon> no idea
<freemangordon> but it might have been activated by hand (ofono script/dbus)
<freemangordon> so I prefer to have a control over what happens
<norayr> shell i have g_hid module? which we don't have? to detect hid devices via usb?
dev has left #maemo-leste [Disconnected: Replaced by new connection]
dev has joined #maemo-leste
dev has left #maemo-leste [#maemo-leste]
dev has joined #maemo-leste
xmn has quit [Ping timeout: 268 seconds]
<buZz> norayr: g_hid is the usb-gadget driver , for emulating a HID device over usb
<buZz> norayr: you probably are looking for either hid-input, hid-core or hiddev
mardy has quit [Quit: WeeChat 3.5]
norayr has left #maemo-leste [Error from remote client]
norayr has joined #maemo-leste
Twig has quit [Ping timeout: 265 seconds]
Livio has quit [Ping timeout: 265 seconds]
akossh has quit [Quit: Leaving.]