ArmbianHelper changed the topic of #armbian to: armbian - Linux for ARM development boards | www.armbian.com | Github: github.com/armbian | Commits: #armbian-commits | Developer talk: #armbian-devel | Forum feed: #armbian-rss | Off-Topic: #armbian-offtopic | Logs: -> irc.armbian.com
<DC-IRC> <dsx724> @IgorPec a few people asked me where the DL for le potato is. the default armbian download page filter obfuscates our board download links
archetech has quit [Quit: Konversation terminated!]
archetech has joined #armbian
LanDi has joined #armbian
TRS-80 has joined #armbian
LanDi has quit [Client Quit]
<Herc> dsx, on https://www.armbian.com/lepotato/ , I see the links at the bottom "Other supported variants"
TRS-80 has quit [Quit: Good night!]
<Herc> older images can be found on https://armbian.lv.auroradev.org/archive/lepotato/archive/ for example
jclsn has quit [Ping timeout: 260 seconds]
jclsn has joined #armbian
lyri has quit [Remote host closed the connection]
jclsn has quit [Ping timeout: 250 seconds]
jclsn has joined #armbian
archetech has quit [Quit: Leaving]
<DC-IRC> <IgorPec> ok, will change defaults to show all boards
<DC-IRC> <IgorPec> done
aasami_ has joined #armbian
archetech has joined #armbian
Neoon has quit [Remote host closed the connection]
Neoon has joined #armbian
nekomancer[m] has quit [Quit: Bridge terminating on SIGTERM]
kreyren2 has quit [Quit: Bridge terminating on SIGTERM]
ShaneonConduitrs has quit [Quit: Bridge terminating on SIGTERM]
dobbelj has joined #armbian
jantones has quit [Quit: Leaving]
jantones has joined #armbian
danilogondolfo has joined #armbian
<DC-IRC> <dsx724> @IgorPec Thanks a lot 😄
kreyren2 has joined #armbian
jantones has quit [Quit: Leaving]
aasami_ has quit [Remote host closed the connection]
dobbelj has quit [Ping timeout: 240 seconds]
<DC-IRC> <Naggina> hello
nekomancer[m] has joined #armbian
ShaneonConduitrs has joined #armbian
<DC-IRC> <Naggina> is it here you can ask questions and get help with linux for a newbi ?
<DC-IRC> <Naggina> if not can you direct me to a plase to get help ?
<DC-IRC> <IgorPec> best option is to use forum. Also if you have general linux problems, use general linux forums, facebook groups, google search, chatGPT
archetech has quit [Quit: Konversation terminated!]
alekksander has joined #armbian
archetech has joined #armbian
jantones has joined #armbian
eldereko has quit [Quit: goodbye]
archetech has quit [Quit: Leaving]
<DC-IRC> <Naggina> ok
eldereko7 has joined #armbian
lyri has joined #armbian
arch3r has joined #armbian
zeemate has joined #armbian
alekksander has quit [Quit: Konversation terminated!]
arch3r has quit [Quit: bye]
<stipa> @Naggina join a channel with the name of distribution you're using
<stipa> this is mostly a channel if armbian is broken and such
<stipa> only newbs claim they're not newbs, there's practically often new hardware to tinker about
<DC-IRC> <krachlatte> guys i need help here
<DC-IRC> <krachlatte> https://pastebin.com/RFhBSt60 this is the bootlog of my radxa e25, kernel is edge 6.3.1
<DC-IRC> <krachlatte> any ideas what neds to be changed ?
<DC-IRC> <krachlatte> fstab and armbian env is korrekt UUID
<DC-IRC> <Tenkawa> @krachlatte we've been having "numerous" problems getting the E25 to work with another distribution
<DC-IRC> <krachlatte> i have one runing fine
<DC-IRC> <Tenkawa> the only thing that seems to consistently work is using the vendor kernels
<DC-IRC> <krachlatte> i have build this image and it is running pretty well Armbian_23.02.0-trunk_Radxa-e25_jammy_legacy_4.19.193.img
<DC-IRC> <krachlatte> yes it is the vendor kernel
<DC-IRC> <krachlatte> and vendor uboot
<DC-IRC> <Tenkawa> legacy is a vendor one
<DC-IRC> <Tenkawa> yes
<DC-IRC> <Tenkawa> 6.x is very problematic right now
<DC-IRC> <krachlatte> what needs to be troublehootet to get this fixed
<DC-IRC> <krachlatte> i do not know were to start
<DC-IRC> <Tenkawa> We've been trying to work on it however the two of us devs don't have the unit to debug it
<DC-IRC> <Tenkawa> We've been doing it remotely with people
<DC-IRC> <krachlatte> i have one here
<DC-IRC> <Tenkawa> been trying to acquire them
<DC-IRC> <Tenkawa> No good USA distributor hehe
<DC-IRC> <krachlatte> [ 3.166252] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
<DC-IRC> <krachlatte> [ 3.178814] mmc0: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
<DC-IRC> <krachlatte> [ 3.236395] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
<DC-IRC> <krachlatte> [ 3.238792] dwmmc_rockchip fe2b0000.mmc: All phases bad!
<DC-IRC> <krachlatte> [ 3.239289] mmc1: tuning execution failed: -5
<DC-IRC> <krachlatte> [ 3.239728] mmc1: error -5 whilst initialising SD cad
<DC-IRC> <krachlatte> [ 3.274914] mmc_host mmc1: Bus speed (slot0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0)
<DC-IRC> <krachlatte> [ 3.287484] mmc0: new HS200 MMC card at address 0001
<DC-IRC> <krachlatte> [ 3.289205] mmcblk0: mmc0:0001 SL32G 28.9 GiB
<DC-IRC> <krachlatte> [ 3.295622] mmcblk0: p1
<DC-IRC> <krachlatte> [ 3.297043] mmcblk0boot0: mmc0:0001 SLD32G 4.00 MiB
<DC-IRC> <krachlatte> [ 3.300357] mmcblk0boot1: mmc0:0001 SLD32G 4.00 MiB
<DC-IRC> <krachlatte> [ 3.303264] mmcblk0rpmb: mmc0:0001 SLD32G 4.00 MiB, chardev (242:0)
<DC-IRC> <krachlatte> [ 3.463641] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
<DC-IRC> <krachlatte> [ 3.466051] dwmmc_rockchip fe2b0000.mmc: All phases bad!
<DC-IRC> <krachlatte> [ 3.466548] mmc1: tuning execution failed: -5
<DC-IRC> <krachlatte> [ 3.466955] mmc1: error -5 whilst initialising SD card
<DC-IRC> <Tenkawa> or I'd be buying one
<DC-IRC> <krachlatte> it shows sd card problems but i do not know how to solve that also tried swaping mmc1 wit mmc0
<DC-IRC> <Tenkawa> that mmc error looks like the high speed patch needs to be put in
<DC-IRC> <Tenkawa> there's an override to make it not run HS400ES at highest speed if I remember correctly
<DC-IRC> <Tenkawa> I think it is a devicetree fix
<DC-IRC> <krachlatte> on the cm3i or the radxa e25 ?
<DC-IRC> <krachlatte> dts ?
<DC-IRC> <Tenkawa> on the e25
<DC-IRC> <Tenkawa> probably best to have it in on "all" controllers of that type
<DC-IRC> <Tenkawa> @amazingfate you around?
<DC-IRC> <krachlatte> this is the rock 3 dts
<DC-IRC> <krachlatte> &sdhci {
<DC-IRC> <krachlatte> bus-width = <8>;
<DC-IRC> <krachlatte> max-frequency = <200000000>;
<DC-IRC> <krachlatte> non-removable;
<DC-IRC> <krachlatte> pinctrl-names = "default";
<DC-IRC> <krachlatte> pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
<DC-IRC> <krachlatte> vmmc-supply = <&vcc_3v3>;
<DC-IRC> <krachlatte> vqmmc-supply = <&vcc_1v8>;
<DC-IRC> <krachlatte> status = "okay";
<DC-IRC> <krachlatte> };
<DC-IRC> <krachlatte> &sdmmc0 {
<DC-IRC> <krachlatte> bus-width = <4>;
<DC-IRC> <krachlatte> cap-sd-highspeed;
<DC-IRC> <krachlatte> cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
<DC-IRC> <krachlatte> disable-wp;
<DC-IRC> <krachlatte> pinctrl-names = "default";
<DC-IRC> <krachlatte> pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
<DC-IRC> <krachlatte> sd-uhs-sdr50;
<DC-IRC> <krachlatte> vmmc-supply = <&vcc3v3_sd>;
<DC-IRC> <krachlatte> vqmmc-supply = <&vccio_sd>;
<DC-IRC> <krachlatte> status = "okay";
<DC-IRC> <krachlatte> };
<DC-IRC> <krachlatte> &sdmmc2 {
<DC-IRC> <krachlatte> bus-width = <4>;
<DC-IRC> <krachlatte> disable-wp;
<DC-IRC> <krachlatte> cap-sd-highspeed;
<DC-IRC> <krachlatte> cap-sdio-irq;
<DC-IRC> <krachlatte> keep-power-in-suspend;
<DC-IRC> <krachlatte> mmc-pwrseq = <&sdio_pwrseq>;
<DC-IRC> <krachlatte> non-removable;
<DC-IRC> <krachlatte> pinctrl-names = "default";
<DC-IRC> <krachlatte> &sdmmc0 {
<DC-IRC> <krachlatte> bus-width = <4>;
<DC-IRC> <krachlatte> cap-sd-highspeed;
<DC-IRC> <krachlatte> cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
<DC-IRC> <krachlatte> /* Also used in pcie30x1_clkreqnm0 */
<DC-IRC> <krachlatte> disable-wp;
<DC-IRC> <krachlatte> pinctrl-names = "default";
<DC-IRC> <krachlatte> pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
<DC-IRC> <krachlatte> and te last one is e25
<stipa> @krachlatte try to use paste sites for such long logs
<DC-IRC> <Tenkawa> @krachlatte what stipa said
<stipa> and for "dts" files too
<DC-IRC> <Tenkawa> And until we get a response from amazingfate/someone and I can ask about the dts kernel read patchs for emmc you will probably just need to idle..
<stipa> @krachlatte you can like paste 5 lines max, that's a standard
<stipa> everything more paste sites
<DC-IRC> <krachlatte> https://pastebin.com/aHgFVKGq
<DC-IRC> <krachlatte> hier are the dts entrys for the rock3a and the cm3i and radxa e25
<DC-IRC> <krachlatte> why does the rock3 have two sdmmc entris and the e 25 only one
<DC-IRC> <krachlatte> sd-uhs-sdr104; and sd-uhs-sdr50 are the major differenzes
<stipa> there could be info in the SOC datasheet
<stipa> what each means
<DC-IRC> <krachlatte> there is this patch patch/kernel/archive/rockchip64-6.3/board-rock3a-emmc-sfc.patch
<stipa> if you find something fishy document a proof and request a pull
<DC-IRC> <Tenkawa> that patch is just adding things.. not disabling
arch3r has joined #armbian
<DC-IRC> <krachlatte> its adding spi but this is not avialable on e25 i think
<DC-IRC> <Tenkawa> the patch fix I have is only for the 3588 not for the soc in the E25
<stipa> SPI is a common feature
<DC-IRC> <Tenkawa> Yes but the "issue" is mmc speed.. not spi
<DC-IRC> <Tenkawa> @krachlatte
<stipa> a chip without SPI is weird
<DC-IRC> <krachlatte> spi-max-frequency = <108000000>;
<DC-IRC> <Tenkawa> stipa: the odroid n2l has no spi
<stipa> that's dumb
<DC-IRC> <Tenkawa> It "is" annoying I agree
<stipa> SPI is pretty much everywhere on the lowest level
<DC-IRC> <Tenkawa> that's the main thing they took out of it from the n2+ I miss
arch3r has quit [Ping timeout: 264 seconds]
<DC-IRC> <Tenkawa> I do like the board in general though
<stipa> @krachlatte i think there's sdr50 in there ^^
<stipa> something related to SD card
<DC-IRC> <Tenkawa> its way quiet today....
<stipa> i would guess ppl don't have a luxury to chat due to crisis and layoffs
<stipa> bigger competition and things
<stipa> especially in the tech industry
<DC-IRC> <Tenkawa> heheh.. wow my gcc-13 build has been running for 24 hours now
<DC-IRC> <Tenkawa> lol
<stipa> @krachlatte sdr104 i guess also related to the SD card
<DC-IRC> <Tenkawa> on my build server it would probably take an hour or two at most lol
<stipa> @krachlattesome timing register or something
<stipa> yeah, a guy compiled rust for two days on an arm board, i guess jetson nano
<nekomancer[m]> own, home-backed, hand-maid rust compiler. mmm...
<DC-IRC> <Tenkawa> I'm running it on my RISC-V board lol
<DC-IRC> <Tenkawa> talk about unoptimized
<DC-IRC> <Tenkawa> proof of concept (and to add some cpu optimizations in)
<stipa> i hope you won't encounter any bugs
<DC-IRC> <Tenkawa> stipa: only a couple hundred I'm sure
<DC-IRC> <krachlatte> i am trying to boot from sd card, @stipa timing register or something; i dont know what to do
<DC-IRC> <krachlatte> gn8
<DC-IRC> <Tenkawa> @krachlatte have you posted to the forums?
<stipa> @krachlatte me neither, i would have to research the whole SD card system and stuff
<DC-IRC> <krachlatte> no worries, i am done for the day
<DC-IRC> <Tenkawa> Ok.
<stipa> bye
<DC-IRC> <krachlatte> i will stare on it tomorow
<stipa> right
<DC-IRC> <Tenkawa> I just noticed there's not even an entry for that board on the site yet
<DC-IRC> <Tenkawa> cheers
<stipa> @krachlatte is the probable maintainer then
arch3r has joined #armbian
<stipa> he's doing great already
<DC-IRC> <Tenkawa> stipa: its becoming a more popular board
<stipa> looks nice, have some punch for modern home networking
<stipa> case..
<DC-IRC> <Tenkawa> we have I think at least 3 people running our (non-Armbian) builder on it
<DC-IRC> <Tenkawa> They just have terrible distribution
<DC-IRC> <Tenkawa> (sales)
<DC-IRC> <Tenkawa> I'd pick up one if I could get one from a normal distributor for the states
<stipa> what can you do, they try to do what's best for them(sales)
<stipa> try aliexpress
<DC-IRC> <Tenkawa> No.. I've had terrible problems with them here
<stipa> yeah, don't use the same shop
<stipa> try another one with better reviews
<DC-IRC> <Tenkawa> Their shipping logistics/customs process is their problem I've run into
<DC-IRC> <Tenkawa> Expensive and takes forever
<DC-IRC> <Tenkawa> Other vendors here seem to get the job done...
<stipa> well, i don't have choice really, china or the US
arch3r- has joined #armbian
<DC-IRC> <Tenkawa> but my Radxa vendor doesn't carry the E25
<DC-IRC> <Tenkawa> (checks again just in case)
arch3r has quit [Ping timeout: 264 seconds]
<stipa> try emailing them
<DC-IRC> <Tenkawa> Yeah I've thought about it
<stipa> that's the fastest way to find out what's their plans about it
arch3r- is now known as arch3r
arch3r has quit [Quit: bye]
arch3r has joined #armbian
lyri has quit [Ping timeout: 240 seconds]
lyri has joined #armbian
danilogondolfo has quit [Quit: Leaving]
arch3r has quit [Quit: bye]
arch3r has joined #armbian
zeemate has quit [Ping timeout: 256 seconds]
archetech has joined #armbian