06:59 <narmstrong> tolszak: sorry no idea why it fails with this config

07:00 <narmstrong> tolszak: do you see some error on the serial console ?

14:58 <Guest27> I get a boot loop on my HC4 after rebooting the system. The bootloader restarts all the time with this on the serial console: "sd/emmc cmd 18 arg 0x000003c1 status 01f0a00f sdio read data fail reset...SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:0;READ:0;0.0;CHK:0;". Is this the current behavior?

16:39 <chewitt> that means the SoC cannot find u-boot (on SPI, SD, or USB)

16:39 <chewitt> https://chewitt.libreelec.tv/testing/u-boot/u-boot.bin.sd.bin-odroid-hc4

16:40 <chewitt> ^ that's u-boot 2022.01 for HC4 .. not tested but nobody complained recently which is normally a good sign

16:50 <Guest27> Power up works. Reboot not. I use a self build U-Boot 2022.01 for HC4. I will try your u-boot sd binary and give feedback. Thanx

18:01 <xdarklight> Guest27: there's this patch which was just posted yesterday evening - it looks like the same (or a very similar) issue to yours: https://patchwork.kernel.org/project/linux-amlogic/patch/20220128193150.GA1304381@odroid-VirtualBox/

18:01 <Guest27> chewitt: Now I use your u-boot "U-Boot 2022.01 (Jan 21 2022 - 15:05:48 +0000) odroid-hc4" and I get the same behavior, a boot loop after rebooting the system. I use the current mainline kernel. Also I get the boot loop when I use the latest armbian image.

18:04 <Guest27> xdarklight: Yes, I still use this patch, this fixes a boot loop at bl2 level. The current boot loop is at BL3X boot level.

18:16 <theleks> I only get it working by porting the amlogic reboot driver from hardkernel branch (https://github.com/hardkernel/linux/blob/odroidg12-4.9.y/drivers/amlogic/reboot/reboot.c). Is this the way to go?