15:22 <set_> I say, I say, I say. I am alive so far in 2023.

15:23 <set_> This is good news.

15:23 <set_> Is anyone familiar w/ the Acorn CNC controller for the BBB?

15:24 <set_> I saw something in the forums about it. I was not familiar w/ this "Cape" thing.

15:24 <set_> This one seems neat!

15:27 <set_> Also, my RX (this receiver) attached to the BBBlue handles about 100mA. On the BBBlue, can I power the Servo Header Rails and utilize this RX (this receiver) w/out other hardware safely?

15:28 <set_> I always thought that the BBBlue and other am335x supported SBCs handled 6mA at most per pin.

15:29 <set_> Anyway, this has and may be the reason for my non-flight-itis.

18:36 <set_> Is the 6v header pins on the Servo Header/Rail equipped to handle 100mA+?

21:07 <zmatt> set_: the 6V regulator is rated for up to 4A continuous current (total for the eight 6V supply output pins)

23:42 <set_> @zmatt: oh. Okay, thank you.

23:43 <set_> 4A. Noted. Thank you.

23:44 <set_> I should have looked in the datasheet for the 6v regulator, right?