06:26 <Guest22> Hello,

06:26 <Guest22> does anybody know from where I can get BBAI with extended temperature ranges from -40C to 85C?

06:27 <Guest22> similar to the enhanced version of BBE offered by SanCloud?

10:14 <set_> I thought the ServoCape was faulty or it was my programming. Either way, it was not. The servos are faulty. Blah!

10:16 <set_> In the clear! speaking of the servoCape, is there going to be an updated versioning coming up?

10:48 <set_> Sorry. Incorrect am I here...again. The servos in question work. Time to try the connections on the servoCape and test my source some more. Aw! Too much, too much.

11:02 <set_> Okay. If...forget it.

11:02 <set_> Everything works.

11:47 <set_> Hello Again, if I run too many servos at once on the ServoCape, would some of them cease to work due to something?

11:48 <set_> For instance, "something" could be amperage or voltage or anything else that gets in the way at a particular time.

11:49 <set_> I have found that all the servos are working, i.e. eight of them. I have also found that running three at a time is fine.

11:50 <set_> Running eight of them at the same freq. and duty_cyle seem to not allow for all of them to move at once or at all, i.e. just some of them move.

11:51 <set_> I mean...what is a test method to find out when, time wise, things go "south"?

11:52 <set_> I only have two channels for testing. Would I test the /dev/i2c-2 device on the BBB for testing this idea?

12:09 <set_> I mean...do I need a real i2c/spi tester or is it possible to test w/ an oscilloscope?

12:31 <set_> Okay...I see why there is no cure. i2c is complicated and drawn out. I will keep on reading.

12:32 <set_> If the i2c buses on the am335x do not support fast mode, how is the ServoCape working w/ the PCA9685 or is allowing/denying fast mode on the PCA9685 an option?

12:38 <set_> I found a ti doc on i2c testing w/ an oscilloscope. Forget me...I will just keep reading. Forget all the items at hand from me. Sorry to ask so many questions.