00:56 <set_> You guys?

00:57 <set_> Fri. Funday?

00:58 <set_> It is only 7:00 at my place.

00:58 <set_> Three hours of total networking and fun in place!

00:59 <set_> Mingle much?

00:59 <set_> About the BBB and am335x of course!

01:00 <set_> So, a little birdie told me that even though the PCA9685 supports super fast data frequencies for i2c, it is the maximum and not a given.

01:01 <set_> This means that even since the am335x does not support that frequency of 4 or 5MHz for the i2c bus, the PCA9685 can still listen to the bus from the BBB since frequencies can be lower than the maximum freq.

01:02 <set_> I can see it work. So, that has to be true. Now, onto finer details!

01:02 <zmatt> set_: whatever your problem is, I can say with fair confidence it's not i2c-related

01:03 <set_> I know.

01:03 <set_> I am enjoying i2c since it works just fine.

01:03 <set_> I have brain issues. Nevertheless, the show must go on!

01:05 <set_> @zmatt: Thank you for at least letting me know something.

01:05 <set_> And yes, it is not i2c related.

01:05 <set_> i2c works!

01:05 <set_> My mechanical apptitude is blight, sparce, and refuted.

01:06 <set_> So, b/c of those three words, my i2c usage has suffered.

01:06 <set_> This has put a damper on my BBB related dealings.

01:06 <set_> But...learning slow over here!

01:08 <set_> That PCA9685 from NXP has a lengthy, not TRM lengthy, datasheet w/ tons of juicy info.

01:09 <set_> I almost figured out how to code something from the datasheet. It was like a blip of thought and then it was gone. I should have had pen and paper. Aw!

03:15 <set_> Okay, okay, okay. Everything in i2c works!

03:15 <set_> Zoinks.

03:15 <set_> I am dumbfounded...

03:15 <set_> Here I am. Geaux BBB!