lanefu changed the topic of #armbian-rockchip to: Armbian - Linux for ARM development boards | Rockchip SoC | www.armbian.com | This channel is relayed to the equivalent Discord channel | this channel is logged
<DC-IRC> [Discord] <k.s.bedford.jr> @gambl0r what are the proper pkgs for the g610 to install ?
<DC-IRC> [Discord] <gambl0r> on bookworm?
<DC-IRC> [Discord] <gambl0r> 5 kernel?
DC-IRC has quit [Remote host closed the connection]
DC-IRC has joined #armbian-rockchip
<DC-IRC> [Discord] <k.s.bedford.jr> is it built for 5.15.0 or 6.x
<DC-IRC> [Discord] <k.s.bedford.jr> I was hoping to try 6.x kernel
<DC-IRC> [Discord] <k.s.bedford.jr> but yes bookworm I am going to attempt a new img for the nanopct6
<DC-IRC> [Discord] <k.s.bedford.jr> also I need a working xorg.conf for it
<DC-IRC> [Discord] <spooky8086> X11 should work in the linked above image, but it will not have HW acceleration. If your using panthor + mesa on mainline I have not seen X11 working on it yet, only wayland.
<DC-IRC> [Discord] <gambl0r> it's built for legacy 5 kernel
<DC-IRC> [Discord] <k.s.bedford.jr> well the opi5 img boots the t6 but has issues
<DC-IRC> [Discord] <k.s.bedford.jr> so I need to get a build for the t6
<DC-IRC> [Discord] <spooky8086> https://www.armbian.com/nanopct6/
<DC-IRC> [Discord] <k.s.bedford.jr> yes but school wants debian not ubuntu based
<DC-IRC> [Discord] <spooky8086> Im not sure if HDMI has been added to the T6 device tree
<DC-IRC> [Discord] <spooky8086> Bookworm is debian.
<DC-IRC> [Discord] <k.s.bedford.jr> but no prebuilt debian desktop img
<DC-IRC> [Discord] <k.s.bedford.jr> it has cli
<DC-IRC> [Discord] <k.s.bedford.jr> and the hdmi should be in the tree I will look
<DC-IRC> [Discord] <spooky8086> You can easily install a desktop env with apt or build from sources.
<DC-IRC> [Discord] <gambl0r> use a bookworm legacy cli image and add what you want
<DC-IRC> [Discord] <spooky8086> Yeah, vop2 and hdmi support needs to be added to the T6 on mainline
<DC-IRC> [Discord] <k.s.bedford.jr> yeah its not there
<DC-IRC> [Discord] <spooky8086> HDMI is very experimental right now, i would recommend looking at the legacy images.
<DC-IRC> [Discord] <k.s.bedford.jr> ok
<DC-IRC> [Discord] <k.s.bedford.jr> input on why so long to support this chip ?
<DC-IRC> [Discord] <k.s.bedford.jr> just so I understand
<DC-IRC> [Discord] <k.s.bedford.jr> well I have the legacy xfce on 1
<DC-IRC> [Discord] <k.s.bedford.jr> that is working so I will add the repo and test
<DC-IRC> [Discord] <k.s.bedford.jr> ok got the mesa and firmware installed
<DC-IRC> [Discord] <dragonflame1010> when i open apps it says error and it wont open
<DC-IRC> [Discord] <gambl0r> Ok
<DC-IRC> [Discord] <dragonflame1010> can u tell me how to fix
<DC-IRC> [Discord] <gambl0r> From the details you've provided, no
<DC-IRC> [Discord] <marty1938> Ok since i cannot find information about the status of E25, no one has paid for it yet?
<DC-IRC> [Discord] <capnemo> Hello, I was wondering : why for the orange pi 5 plus we have only or the legacy (5.10) or the edge (whatever is the newest rc) and no choice in between ? something I'm missing ?
<DC-IRC> [Discord] <spooky8086> RK3588 is bleeding edge, mainline support is slowly making progress. For now the only kernel that fully supports all RK3588 hardware is legacy 5.10.
<DC-IRC> [Discord] <capnemo> ah that makes total sense πŸ™‚ thanks a lot !
<DC-IRC> [Discord] <nicod_sbc> Anyone who used the HDMI-in on RK3588? I think I once made it work, but can't make it work on OrangePi5+. I do have obs-studio and obs-gstreamer installed. Do I need something more?
<DC-IRC> [Discord] <k.s.bedford.jr> well the legacy kernel 5.10.160 works
<DC-IRC> [Discord] <k.s.bedford.jr> I got the mesa loaded
<DC-IRC> [Discord] <k.s.bedford.jr> but I need to know the changed to the xorg to make it all function
<DC-IRC> [Discord] <k.s.bedford.jr> I also have to figure a few small things out otherwise I can say thorium on the t6 works great
<DC-IRC> [Discord] <monkablyat> never used the hdmi input on linux only android however maybe this will help https://forum.radxa.com/t/hdmi-input-usage/13161
<DC-IRC> [Discord] <monkablyat> also downloaded a script at some point for the hdmi input on rk3588 Linux but never used it so far
<DC-IRC> [Discord] <nicod_sbc> Nice, I'll try that.
<DC-IRC> [Discord] <stonededge> Does anyone know if it’s possible to extract the raw DP lanes from RK3588 instead of having to use type-c TCPM? I kinda just want to get access to them directly from the GPU without having to negotiate an alternate mode over the type-c port (I.e just force them to be available on the port at all times) for testing
<DC-IRC> [Discord] <stonededge> (I know none of the RK3588 boards have any dedicated DP receptacles) but the data is sent to the USB-C ports but requires a TCPM like the FUSB302 to negotiate DP alt mode. I kinda just want to make them available without needing to negotiate for debug purposes
<DC-IRC> [Discord] <k.s.bedford.jr> well I have to say the t6 is performing well and thorium browser rocks on the t6 now
<DC-IRC> [Discord] <k.s.bedford.jr> next is to get the 4glte working
<DC-IRC> [Discord] <k.s.bedford.jr> so we can have a working dev unit for school
<DC-IRC> [Discord] <k.s.bedford.jr> all is good
tkaiser has joined #armbian-rockchip
<tkaiser> @capnemo: Rockchip's current BSP kernel drop for RK3588 is at 6.1.25 and not 5.10 any more: https://github.com/friendlyarm/kernel-rockchip/blob/nanopi6-v6.1.y/Makefile#L2-L4
<DC-IRC> [Discord] <k.s.bedford.jr> ok
<DC-IRC> [Discord] <Tonymac32> Not a clue unfortunately, if it's structured the way the RK3399 is driver wise it will have the same problem as the Rock Pi 4C which requires some hacks to make the driver play nice
<DC-IRC> [Discord] <Tonymac32> Why it wasn't written with the possibility of a "bare" DP I have no idea
<DC-IRC> [Discord] <Tonymac32> The hardware could care less, the drivers are the oroblem
<DC-IRC> [Discord] <Tonymac32> The hardware could care less, the drivers are the problem
<DC-IRC> [Discord] <Tonymac32> Thanks TKaiser, good info
<DC-IRC> [Discord] <spooky8086> There has not been an official drop or release for the 6.1 BSP yet.
<DC-IRC> [Discord] <spooky8086> There is only a dev branch and I've been checking the rockchip code base daily.
<DC-IRC> [Discord] <djhardrich> This may be useful as well, seems like it may be more 356x-centric: https://github.com/orangepi-xunlong/linux-orangepi/tree/orange-pi-6.6-rk35xx
<DC-IRC> [Discord] <Tonymac32> Considering how much butchering they need to do I'm sure it takes a while to get rid of all the ghosts
<DC-IRC> [Discord] <Tonymac32> When they release the BSP it's intended to be production for actual devices, not like what the individual SBC vendors often do
<tkaiser> That's RK's timeline for 6.1 for the various SoC families: https://cdn.cnx-software.com/wp-content/uploads/2023/11/Rockchip-SDK-release-schedule.png
juri_ has quit [Ping timeout: 252 seconds]
<DC-IRC> [Discord] <spooky8086> That is correct. However I have direct access to the Rockchip SDK and there has been no 6.1 release or tag for rk3588. I do expect it to be released soon as it's coming to the end of December.
juri_ has joined #armbian-rockchip
<tkaiser> While at the same time we can watch what they've done forwarding porting their stuff from 5.10 to 6.1 over at FriendlyELEC's kernel repo, e.g.: https://github.com/friendlyarm/kernel-rockchip/commits/nanopi6-v6.1.y/?after=889af935bdcf122676e4b92f749603b688b66fa8+244
<DC-IRC> [Discord] <Tonymac32> ffs
<DC-IRC> [Discord] <Tonymac32> "Why don't our boards get put into mainline?"
<DC-IRC> [Discord] <Tonymac32> it took me a week to sort the spaghetti out to submit trhe T6
juri_ has quit [Read error: Connection reset by peer]
juri_ has joined #armbian-rockchip
juri_ has quit [Read error: Connection reset by peer]
juri_ has joined #armbian-rockchip
juri_ has quit [Ping timeout: 256 seconds]
juri_ has joined #armbian-rockchip
<DC-IRC> [Discord] <lanefu> are those DTS for specific board revisions? or uhhh just different attempts lol.. either way painful
juri__ has joined #armbian-rockchip
juri_ has quit [Ping timeout: 252 seconds]
juri__ has quit [Ping timeout: 255 seconds]
juri_ has joined #armbian-rockchip
juri_ has quit [Read error: Connection reset by peer]
juri_ has joined #armbian-rockchip
juri_ has quit [Read error: Connection reset by peer]
juri_ has joined #armbian-rockchip
juri_ has quit [Ping timeout: 268 seconds]
juri_ has joined #armbian-rockchip
<DC-IRC> [Discord] <cesiro> How can I update armbian 6.7 rc1 to 6.7 rc4
<DC-IRC> [Discord] <cesiro> How can I update armbian 6.7 rc1 to 6.7 rc4?
<DC-IRC> [Discord] <c0rnelius77> They are usually for diff models. For whatever reason they to just name them rev1,2,3 and so on.
<DC-IRC> [Discord] <c0rnelius77> They are usually for diff models. For whatever reason they like to name them rev1,2,3 and so on.
<DC-IRC> [Discord] <c0rnelius77> They did the same thing for the 3568 units.