lanefu changed the topic of #armbian-rockchip to: Armbian - Linux for ARM development boards | Rockchip SoC | www.armbian.com | This channel is relayed to the equivalent Discord channel | this channel is logged
<DC-IRC>
<Alchemy1701 BKR No 1021> Heya guys and gals, do you know if a Orange Pi 5B distro is in the works or will the standard OP5 image work with WiFi enabled now ?
<DC-IRC>
<Alchemy1701 BKR No 1021> Oh and no April fools answers please... Money is involved...lol.
<DC-IRC>
<Tenkawa> You need to elaborate your question more...
<DC-IRC>
<c0rnelius> looks like the 5b has an onboard wifi module
<DC-IRC>
<Alchemy1701 BKR No 1021> Ok....I'm wanting to know if there are any plans to release an Armbian image for the Orange Pi 5B that incorporates the additional drivers and overlays in the /boot/dtb folder so that installing on an SD card and then putting it in the card drive on the 5B board will allow it to boot and automatically find the newly added WiFi and Bluetooth module offered on that board... Or, is the current Orange Pi 5 image being/has
<DC-IRC>
<Tenkawa> I don't know about automatic but there is the armbian-config utility
<DC-IRC>
<c0rnelius> doesn't look to be super complicated. use the prober dtb and and the firmware
<DC-IRC>
<Alchemy1701 BKR No 1021> Would be nice if it just works otb... I'm still learning a lot so haven't really done much dtb and firmware stuff...
<DC-IRC>
<Tenkawa> for the video/etc
<DC-IRC>
<Tenkawa> @Alchemy1701 BKR No 1021 this board is very new... part of being a new board
<DC-IRC>
<Tenkawa> @c0rnelius yeah thats only for the kernel thojgh
<DC-IRC>
<Tenkawa> @c0rnelius yeah thats only for the kernel though
<DC-IRC>
<Tenkawa> not for firmware and the other mods
<DC-IRC>
<c0rnelius> armbian last I checked is using their own repo for rk3588.
<DC-IRC>
<Tenkawa> and they did a lot for the 3d/etc
<DC-IRC>
<c0rnelius> no shit. but if its not there and they are building from there all the firmware in the world won't make it work if they don't have the dtb 🙂
<DC-IRC>
<c0rnelius> come on
<DC-IRC>
<Tenkawa> They are packaging some of it in ppa's... note above
<DC-IRC>
<c0rnelius> ok Tenkawa
<DC-IRC>
<c0rnelius> i guess there is ur answer. use the ppa to install a dtb
<DC-IRC>
<Alchemy1701 BKR No 1021> https://www.google.co.uk/url?sa=t&source=web&rct=j&url=https://forum.armbian.com/topic/26494-guide-how-to-get-the-official-orange-pi-5-wifi-m2-module-working-in-armbian-and-orange-pi-os/&ved=2ahUKEwj7y8zZwIf-AhWcTUEAHZkPAGYQFnoECAgQAQ&usg=AOvVaw2vCusccMK17gQZIqI9qlx_
<DC-IRC>
<Alchemy1701 BKR No 1021> There's this, and the new on board module for WiFi is the same spec but this was mentioned nearly two months ago, just wondered if it had been added to the image already?
<DC-IRC>
<c0rnelius> and it looks like it is in their linux source code
<DC-IRC>
<Tenkawa> Sadly for this board they did for the graphics... thats those ppa's I posted above for 3d to work (if they care about 3d)
<DC-IRC>
<Tenkawa> I think that might be amazingfate's... not sure
<DC-IRC>
<c0rnelius> probs more than likely no one has the board. so no official releases as no one can support it.
<DC-IRC>
<Tenkawa> let me pull one of the predone images and see if that overlay orangepios is in ot.. I doubt it though
<DC-IRC>
<Tenkawa> let me pull one of the predone images and see if that overlay orangepios is in it.. I doubt it though
<DC-IRC>
<c0rnelius> i see no wifi related overlays
<DC-IRC>
<Tenkawa> ok, didnt think si
<DC-IRC>
<Tenkawa> ok, didnt think so
<DC-IRC>
<Tenkawa> @Alchemy1701 BKR No 1021 yeah you would have manual work to do any route you go
<DC-IRC>
<c0rnelius> check to see if the dtb is in /lib/linux-*
<DC-IRC>
<Tenkawa> which is what the doc said was needed
<DC-IRC>
<Tenkawa> thats even in the Armbian_23.02.2_Orangepi5_jammy_legacy_5.10.110_minimal so its in the smallest of images
<DC-IRC>
<amazingfate> Why you need a wifi overlay on opi5 since it doesn't have a wifi module.
<DC-IRC>
<amazingfate> The m.2 slot is M key, which is not compatible with wifi module.
<DC-IRC>
<amazingfate> The device tree of opi5b is already in armbian's image. You can just try a image of opi5 and edit `/boot/armbianEnv.txt` to change the dtb filename after booting up.
<DC-IRC>
<Tenkawa> @amazingfate i didn't think it had wifi but I wasn't 100% sure about that
<DC-IRC>
<Tenkawa> I thought that one was eth only
<DC-IRC>
<Maztitos> Just curious, is the next release for orange pi 5/other rk3588 boards planned to have the GPU drivers included?
<DC-IRC>
<EfeCTN> Perhaps, we can import opi5 and make some adjustments instead of creating it from scratch. They are mostly same
<DC-IRC>
<Werner> Right. They won't be included. Not the fork at least. When it hits upstream then different story. Until then everyone is free to install them for themselves with just a few commands.
<DC-IRC>
<Maztitos> Understood, thank you!!
<DC-IRC>
<EfeCTN> I'm not able to boot system with any SD card on OPi5. Just getting kernel panic and
<DC-IRC>
<EfeCTN> I'm not able to boot system with any SD card on OPi5. Just getting kernel panic and [ 17.306389] rk3x-i2c fd880000.i2c: timeout, ipd: 0x3b, state: 3
<DC-IRC>
<EfeCTN> [ 17.508305] rk806 spi2.0: SPI transfer timed out
<DC-IRC>
<EfeCTN> [ 17.508778] spi_master spi2: failed to transfer one message from queue
<DC-IRC>
<EfeCTN> [ 17.711634] rk806 spi2.0: SPI transfer timed out
<DC-IRC>
<EfeCTN> [ 17.712074] spi_master spi2: failed to transfer one message from queue
<DC-IRC>
<EfeCTN> do you guys have an idea?
<DC-IRC>
<EfeCTN> booting from nvme works without any problem
<DC-IRC>
<EfeCTN> I'm not able to boot system with any SD card on OPi5. Just getting kernel panic and