00:36 <_whitenotifier-7> [scopehal] azonenberg opened issue #666: D-PHY: support escape mode decode - https://github.com/glscopeclient/scopehal/issues/666

00:36 <_whitenotifier-7> [scopehal] azonenberg assigned issue #666: D-PHY: support escape mode decode - https://github.com/glscopeclient/scopehal/issues/666

00:36 <_whitenotifier-7> [scopehal] azonenberg labeled issue #666: D-PHY: support escape mode decode - https://github.com/glscopeclient/scopehal/issues/666

05:40 <_whitenotifier-7> [scopehal-docs] azonenberg pushed 1 commit to master [+0/-0/±1] https://github.com/glscopeclient/scopehal-docs/compare/06740d5322f0...e28766aba66b

05:40 <_whitenotifier-7> [scopehal-docs] azonenberg e28766a - Initial skeleton documentation for D-PHY escape mode decode

06:14 <_whitenotifier-7> [scopehal] azonenberg pushed 1 commit to master [+2/-0/±4] https://github.com/glscopeclient/scopehal/compare/619bb4ad78e6...22f5d4388fbd

06:14 <_whitenotifier-7> [scopehal] azonenberg 22f5d43 - Initial implementation of D-PHY Escape Mode protocol decode. Fixes #666.

06:14 <_whitenotifier-7> [scopehal] azonenberg closed issue #666: D-PHY: support escape mode decode - https://github.com/glscopeclient/scopehal/issues/666

06:14 <_whitenotifier-7> [scopehal-apps] azonenberg pushed 1 commit to master [+0/-0/±2] https://github.com/glscopeclient/scopehal-apps/compare/852cfcf2fa1d...fb073ccd13d1

06:14 <_whitenotifier-7> [scopehal-apps] azonenberg fb073cc - Updated submodules

06:26 <darthrake> azonenberg: when the large hydraulic mag base arms are to expensive (the large 550mm ones are 400eur per pcs) or not strong enough anymore I usually have a few Manfrotto 244N around.

06:29 <azonenberg> Yeah i'm looking at some Noga stuff

06:29 <azonenberg> they look to have a 45mm, 1", and 2" clamp that you can put at the end of the arm

06:29 <azonenberg> one of those should fit my vacuum, just have to measure the nozzle

06:31 <azonenberg> the other option is loc line, it looks like it goes up to 1"

06:32 <azonenberg> but 3/4" is the largest commonly stocked

06:34 <darthrake> there is manfrotto 035 "super clamp". clamps everything up, round or squre 15-55mm

06:35 <darthrake> the noga stuff is certainly nicer.

06:35 <azonenberg> Yeah. I'm gonna look at all these options and think about what makes the most sense

06:35 <darthrake> but at I would guess 2x the price

06:35 <azonenberg> the goal is just to have dust/chip collection on the mill with good performance and be easy to quickly disconnect so i can clean the floor etc

06:37 <azonenberg> and not be constantly annoyed that my painter's tape holding the shopvac in the general direction of the mill came loose again while i was working :p

06:51 <azonenberg> also https://www.antikernel.net/temp/dphy-escape1.png

06:51 <azonenberg> https://www.antikernel.net/temp/dphy-escape2.png

07:08 <azonenberg> D-PHY escape mode decode

07:08 <azonenberg> Also, just took a pass through the glscopeclient manual, specifically the filter section. Not good :p

07:08 <azonenberg> We have 136 filters of which only 10 have full docs, 19 more have at least a paragraph of text but are missing at least one of (screenshot, list of parameters, list of inputs, description of outputs)

07:09 <azonenberg> another 94 have a one sentence description, and the last 13 have an empty heading with no content whatsoever

07:46 <miek> btw, on the dust/chip collection topic, loc-line has a system of larger-diameter vacuum hose with various adapters & nozzles - https://www.loc-line.com/products/system/212-vacuum/

15:23 <azonenberg> miek: my vacuum cleaner is only like 1.25" or so hose diameter

15:23 <azonenberg> so i dont want to go too big and have the static pressure drop horribly

15:24 <azonenberg> 3/4" might work better

16:29 <electronic_eel> i don't have experience with their larger indicator holders, but i have a "regular" sized noga and it is good quality. also have a atorn brand one, quality is about the same

16:31 <electronic_eel> i fixed several stlyes of clamps to them and use them to hold connectors and wiring for soldering