04:33 <mrec> openocd needs a better interface... everytime I use it it works well but if you don't touch it no one will remember those alien commands

04:33 <mrec> if I don't touch it for months

04:34 <mrec> it's impossible to figure outhow to access a flash via FTDI2232H within a few minutes

04:39 <mrec> flashrom is using those idiot buildsystems again ...

05:10 <mrec> openai cannot handle it either, too much confusing documentation out there I guess

05:13 <mrec> Error: unable to open ftdi device with vid 0403, pid 6010, description 'FT2232H MiniModule', serial '*' at bus location '*'

05:13 <mrec> right...

05:13 <mrec> Bus 003 Device 007: ID 0403:6010 Future Technology Devices International, Ltd FT2232C/D/H Dual UART/FIFO IC

05:13 <mrec> this nonsense doesn't work

05:13 <mrec> alien parameters ... not for humans

05:52 <ALTracer> zapb_: I have also seen this changeset from 2 years ago but it was never reviewed

05:52 <ALTracer> https://review.openocd.org/c/openocd/+/6878

05:58 <ALTracer> We use AT32F403A and sometimes AT32F435/F437, and I needed EOPB0 access to change SRAM/NZW split but you don't expose option bytes commands?

05:59 <ALTracer> If you point me to some branch with PR8667, I can checkout, compile for Linux amd64 and test against two family devices

07:09 <zapb_> mrec, feel free to submit a patch with a better interface or make some suggestion

07:10 <zapb_> ALTracer, what do you mean with "point you to some branch"? You can download the branch in Gerrit

07:10 <zapb_> git fetch https://review.openocd.org/openocd refs/changes/67/8667/6 && git checkout -b change-8667 FETCH_HEAD

07:11 <zapb_> ALTracer, at the moment option bytes are not exposed but everything is prepared for it

07:12 <zapb_> ALTracer, only the user interface is missing and I'm not sure which UI is the best for option bytes

07:12 <zapb_> There are different types in OpenOCD at the moment: a simple read/write (stm32l4x) or dedicated commands

07:24 <ALTracer> I have never worked with Gerrit, that's all, only Github and Gitlab selfhosted

07:25 <ALTracer> UI... I have no good answer to that. I only implemented `monitor option 0x1fff8010 0x01FE` in Black Magic Debug because they've had that in other drivers (and GDB RSP is restricted to O-packets or vFlashWrite)

07:26 <ALTracer> Flipping halfwords is often easier than programming the entire page, and the debugger manages read-modify-erase-write using its heap RAM.

07:58 <PaulFertser> mrec: I think it's clear that the description doesn't match, your module has a different description but config doesn't have a wildcard there.