08:43 <Wizzup> inky: do you mirror the screen to it?

08:44 <Wizzup> I also have one here but found it a bit finicky sometimes to do with xrandr

08:44 <Wizzup> so would like to hear how you do it (nad pls add it to the wiki)

16:21 <Wizzup> uvos: does hotspot work again?

16:21 <Wizzup> it works now for me

16:23 <Wizzup> on 6.1.76

16:24 <Wizzup> using 2:2.10-8~bpo11+2

16:24 <Wizzup> hostapd

16:26 <Wizzup> ok, so it's the backports that fixes it in all likelyhood

16:28 <Wizzup> we should build that I guess

16:32 <Wizzup> I will build it for -devel

16:49 <Wizzup> uvos: if you can, please confirm that it doesn't work with the non-backports version

17:18 <Wizzup> uvos: hm, or maybe it's kernel related, it doesn't work on our 6.6

19:21 <Wizzup> uvos: I tried to rebase on latest 6.6.x, will see if it works

19:26 <arno11> hotspot working ? nice

19:26 <Wizzup> well it used to work on d4 with a simple script

19:26 <Wizzup> on n900 it is more complicated

19:26 <arno11> ok

19:26 <Wizzup> since the hw cannot do host mode, you need some other mode

19:26 <arno11> ah ok

19:29 <Guest48> hello, wanted to give leste a shot, had cyenogenmod previously on my droid with safestrap, now reflashed with recommended android and flashed kexecboot, but I do not see kexecboot, the phone just boots straight to android. I reflashed the device with different versions of kexecboot, but it still seems to just boot to android. Am I missing

19:29 <Guest48> something?

19:30 <Wizzup> droid being droid4?

19:30 <Guest48> the device is droid4

19:30 <Wizzup> ok

19:30 <Wizzup> https://leste.maemo.org/Motorola_Droid_4

19:30 <Wizzup> so you followed the steps there?

19:31 <Wizzup> and none of the steps gave an error?

19:33 <Guest48> yes. that steps, they were OK. Once I forgot reboot to bootloader it returned that the flashing failed as the device was protected, so it seems like the "flash mbm" step actually does the job

19:34 <Wizzup> ok, so is that enough for you to be able to continue?

19:35 <Guest48> I found in the channel history that someone back in 2022 also did not see kexecboot after installation but he just redid the steps and it helped, I flashed it now several time to no success

19:38 <Guest48> all the steps were succesful, and the device no longer has safstrap + cynaogenmod but verizon android and no safestrap it just does not show kexecboot, unless I need to somehow activate kexecboot, tried to boot with buttons down, keyboard open, but it boots straight to android. Should kexecboot show something during boot?

19:39 <Wizzup> I will be right back.

19:39 <Wizzup> Did you run the flash-droid-4-fw.sh script?

19:40 <Guest48> maybe I should try with other sdcard? I use toshiba 8gb card

19:41 <Guest48> yes, with this script I installed the android over previous safestrap+cyanogenmod system

19:43 <Wizzup> ok

19:43 <Wizzup> I would honestly just retry both steps - the android install and then kexecboot

19:44 <Wizzup> I don't think you need a sd card in there to see kexecboot

19:45 <Guest48> will try that, after installing android, should I erase user data and cache?

19:45 <Wizzup> I think the script will do that if it is necessary

19:56 <sicelo> arno11: N900's wl1251 can't do AP mode. you can do adhoc mode, but iirc Android phones can't connect in adhoc mode

19:58 <arno11> ah ok

19:59 <Wizzup> tmlind: to me it seems like the main difference between 6.1 and 6.6 seems to be the additional n_gsm.c patches

19:59 <Wizzup> (which could perhaps cause no audio in calls)

20:34 <Guest48> thanks for your hints, after reflashing it two more times, I returned to basics and found out that kexecboot image was broken, after redownloading it I can see the boot menu. Thanks!

20:35 <Wizzup> ha, check :)