06:14 <chewitt> nomius RPi2/3 has no hardware decode for HEVC, and 10.x has no software optimisation for HEVC, so that's expected

06:15 <chewitt> If you need better HEVC support, either stick to LE 9.2 or start plotting an RPi4 update (which has hardware decode)

06:49 <nomius> Thanks chewitt

06:50 <nomius> Is that the same on wetek play 2? (I saw your build using LE 10.x)

07:04 <chewitt> AMLGX has working HEVC support

07:04 <chewitt> seek isn't reliable (the codec is still work in progress) but playback works

07:05 <chewitt> 4K also works, but there's not native HDR support on an S905 chip and HDR > SDR conversion is not currently supported

07:05 <chewitt> but for typical 1080p HEVC content all is good

07:06 <chewitt> AMLGX images are LE11 code btw, not 10.x

12:26 <shibboleth> what is to be expected re rpi2,3,3b+ h265/hecv decoding? on le 9.2.8 they were able to do smooth 720 playback (sw), on 10.0.2 they're borking on the same feed once there is a lot of motion (say a news broadcast switching from the anchor speaking to a news segment with some motion=

12:27 <shibboleth> i was reading online that the pi3 should be able to do 1080 hevc playback, can't say this was the case on 928

12:29 <LEBot> [slack] <CvH> Hevc is unlikely supported again at the Rpi2/3

12:50 <shibboleth> as in: likely broken and unlikely to be properly supported henceforth?

13:04 <oblikoamorale> https://dpaste.org/BWfw/raw

13:29 <shibboleth> seems i've been able to get it working: config.txt: dtoverlay=vc4-kms-v3d,cma-256 , dtoverlay=rpivid-v4l2