14:06 <NishanthMenon> tomba: lets continue the beagle ai64 specific conversation here. looking at https://git.beagleboard.org/beagleboard/beaglebone-ai-64/-/blob/main/hw/BeagleBone_AI-64_Rev_B1_SCH_220602.pdf, https://usercontent.irccloud-cdn.com/file/t4MpoZcS/image.png sd should be the fall back if we wipe the emmc boot off.. https://github.com/nmenon/beagle-ai64-boot-build/blob/main/lnx-write-boot-emmc.sh (there is a delay for switch to

14:06 <NishanthMenon> backup boot though)

14:06 <NishanthMenon> tomba: lets continue the beagle ai64 specific conversation here. looking at https://git.beagleboard.org/beagleboard/beaglebone-ai-64/-/blob/main/hw/BeagleBone_AI-64_Rev_B1_SCH_220602.pdf, https://usercontent.irccloud-cdn.com/file/t4MpoZcS/image.png sd should be the fall back if we wipe the emmc boot off.. https://github.com/nmenon/beagle-ai64-boot-build/blob/main/lnx-write-boot-emmc.sh

14:07 <tomba> NishanthMenon: yep, I wiped the emmc boot partition, and now I see (I think) the u-boot coming from the sdcard. Still can't save my env, though. (Trying to get it use my uEnv.txt by default).

14:07 <NishanthMenon> I think the defaults use extlinux.conf

14:08 <NishanthMenon> at least the distroboot defaults which we use.. i think..

14:09 <tomba> shouldn't saveenv still stick?

14:14 <jkridner> did you change bootcmd?

14:15 <tomba> So now if I break the boot, and do "run envboot", the board does what I want, getting everything via tftp and booting with nfsroot. I can change the bootcmd, and then just "boot" works fine. But if I "saveenv", the bootcmd is again back to the old one.

14:16 <tomba> saveenv says OK, but also gives an i2c error:... (full message at <https://libera.ems.host/_matrix/media/v3/download/libera.chat/5d81a7beb3d84854b8c4294091fc6ecaaae03182>)

14:16 <jkridner> https://git.beagleboard.org/beagleboard/u-boot/-/tree/v2021.01-ti-08.05.00.001 is this our production version rcn-ee ?

14:18 <tomba> I can see "uboot.env" on the sdcard, and that contains my bootcmd, but I guess u-boot doesn't actually load that when starting

14:23 <NishanthMenon> @jkridner @rcn-ee i think it is using vestiges of sk board's dts (pcf gpio expander stuff - which ai64 does'nt have)

14:34 <tomba> Which u-boot branch should I use to compile u-boot for AI-64 myself?

20:00 <LetoThe2nd> inevitable question from my end - any idea when there will be yocto support for the beagleplay?

20:07 <LetoThe2nd> ... addendum: there are also no images listed on https://beagleboard.org/latest-images

21:16 <Sina> Hello , I have a problem to install the FTDI driver on mac os VENTURA 13.1

21:18 <Sina> Is there someone to help ?