11:52 <rkta> I get 'Error: failed to read memory at...' when trying to program my device. It worked before, with this error coming occassionally. Now the error is permanent. Any ideas what could be the possible cause? Shortlog: vs2.rkta.de/files/d2.log Longlog: vs2.rkta.de/files/d3.log

11:53 <karlp> loose ground cabling?

11:54 <rkta> I have a needle adapter attached.

11:54 <rkta> And the device is powered via usb.

11:55 <karlp> if the same setup worked before and _really_ hasn't changed, I'd only suspect bumped cabling.

12:03 <rkta> Besides the usb cable and the needle adapter there is no cabling involved.

12:04 <karlp> you didn't kill it any other way in the meanitime?

12:04 <karlp> does DFU still work for instance?

12:04 <karlp> does it work if you hold it in reset?

12:07 <rkta> I was not touching it and made only minor changes to the logic part of the code. I have to look how I can hold it in reset.

12:39 <rkta> karlp: Holding it in reset gives error 'Unable to reset target'.

13:41 <rue_mohr> I love it when firmware is holding an io in a state that blocks a programmer