dgilmore changed the topic of #fedora-riscv to: Fedora on RISC-V https://fedoraproject.org/wiki/Architectures/RISC-V || Logs: https://libera.irclog.whitequark.org/fedora-riscv || Alt Arch discussions are welcome in #fedora-alt-arches
zsun has joined #fedora-riscv
oaken-so1rce is now known as oaken-source
zsun has quit [Quit: Leaving.]
<davidlt[m]> Hopefully within a few hours GCC build will be done
<davidlt[m]> and another one will be launched :)
<davidlt[m]> also there will be 12.2 soonish IIRC thus another build!
<davidlt[m]> The last time it took 58 hours to produce a GCC build (probably 50+% of that is for the test suite).
<davidlt[m]> 5 hours ago: The GNU C Library version 2.36 is now available
<davidlt[m]> It's sad that a lot of tests within GCC fails because of "program timed out".
jcajka has joined #fedora-riscv
<rwmjones> fyi nujive crashed yet again because of the heat apparently
<rwmjones> I'm going to have to put the CPU fan back on that one
<davidlt[m]> rwmjones: what was the last temperature?
<rwmjones> I do need to run a script that prints that out until it crashes ..
zsun has joined #fedora-riscv
bkeys has joined #fedora-riscv
zsun has quit [Quit: Leaving.]
<rwmjones> $ while true; do date; sudo sensors; sleep 10m ; done
<rwmjones> nujive is back up ...
zsun has joined #fedora-riscv
zsun has quit [Quit: Leaving.]
jcajka has quit [Quit: Leaving]
<rwmjones> on nujive:
<rwmjones> tmp451-i2c-0-4c
<rwmjones> Adapter: i2c-ocores
<rwmjones> M/B Temp: +57.5°C (low = +0.0°C, high = +85.0°C) (crit = +85.0°C, hyst = +75.0°C)
<rwmjones> CPU Temp: +74.8°C (low = +0.0°C, high = +85.0°C) (crit = +85.0°C, hyst = +75.0°C)
<rwmjones> on nufive (has the stock CPU fan running):
<davidlt[m]> that's bad
<rwmjones> tmp451-i2c-0-4c
<rwmjones> Adapter: i2c-ocores
<rwmjones> M/B Temp: +57.6°C (low = +0.0°C, high = +85.0°C) (crit = +85.0°C, hyst = +75.0°C)
<davidlt[m]> you should avoid going above 40-45C
<rwmjones> CPU Temp: +64.2°C (low = +0.0°C, high = +85.0°C) (crit = +85.0°C, hyst = +75.0°C)
<rwmjones> so it's about 10C higher on nujive (just the case fan)
<rwmjones> so it's about 10C higher on nuFive (just the case fan)
<davidlt[m]> Note, that at 85C the board will auto-shutdown
<rwmjones> bleh
<rwmjones> nufive has the stock fan
<rwmjones> nujive has just the case fan
<rwmjones> just the case fan is 10C higher
<rwmjones> right, I see that!
<rwmjones> guess it explains why nujive was shutting down
<davidlt[m]> and that's without me pushing any work while I am compiling GCC
<rwmjones> I'll put the CPU fan back later
<davidlt[m]> Why do you have so high temps?
<davidlt[m]> Move the boards to the basement (if you have one)?
<rwmjones> the office is in direct sun, no basement sadly :-/
<rwmjones> the loft is even hotter
<davidlt[m]> are you efficient at these temperatures? :)
<davidlt[m]> I mean you should be sweating a lot :)
<rwmjones> I'm not working in the office for obvs reasons!
<rwmjones> here's an x86-64 machine in the loft:
<rwmjones> Package id 0: +50.0°C (high = +100.0°C, crit = +100.0°C)
<rwmjones> Core 0: +48.0°C (high = +100.0°C, crit = +100.0°C)
<rwmjones> Core 1: +49.0°C (high = +100.0°C, crit = +100.0°C)
<davidlt[m]> :D
<rwmjones> here's a similar x86-64 machine in the office:
<rwmjones> Package id 0: +60.0°C (high = +100.0°C, crit = +100.0°C)
<rwmjones> Core 0: +59.0°C (high = +100.0°C, crit = +100.0°C)
<rwmjones> Core 1: +60.0°C (high = +100.0°C, crit = +100.0°C)
<rwmjones> surprisingly warmer ...
<rwmjones> so the loft is not hotter
<davidlt[m]> GCC build is finally writing out the RPMs
<davidlt[m]> 3 days to compile
<rwmjones> that's on nufive?
<davidlt[m]> nothing
<davidlt[m]> I want a new GCC before going forward
<davidlt[m]> So it's idling at those temps
<rwmjones> I'm going to open the office door now, let's see if it cools
<davidlt[m]> Your temps are definitely too high
<davidlt[m]> djdelorie handles multi-day compiles without issues, but yours tends to die
<rwmjones> the ambient air temp in the office is 30C
<davidlt[m]> RPMS are written and Koji is copying them!
<davidlt[m]> annobin and a new GCC 12 build to be submitted
<rwmjones> temps dropped 5C by me opening the office door
<djdelorie> my board is in my basement, ambient closer to 20C
<djdelorie> cpu at 47C at the moment
bkeys has quit [Quit: With every step we take, danger will follow closely]
bkeys has joined #fedora-riscv