14:16 <kenny> I tried a few things attempting to boot a mainline u-boot from sd for a gxbb. I keep getting a process exception 'Unaligned'. I've tried using the armlogic-boot-fip and the baylibre 20170606 code to create the binaries, and tried writing both the .bin and the .bin.sd.bin to the card without any luck. Can anyone suggest anything I might be missing?

14:21 <kenny> I posted a log with a few boot loops at https://pastebin.com/ZsLBfzv2

14:25 <narmstrong> kenny: some of the Oops are happening on the BL31 code, are you sure your board is in working condition ?

14:32 <kenny> it was before I pulled the nand chip :)

14:33 <kenny> it was working with an android image on the nand, and with a libreelec on the sd card

14:34 <kenny> iirc the libreelec boot didn't work without the nand u-boot, but I didn't expect it to, so I'm not sure I tested that very well. I could flash it to the SD card again

16:01 <kenny> as a test I wrote the aml_sdc_burn.UBOOT extracted from an android rom (the coolio one), and it appeared to load u-boot (using an older bl2 & uboot): https://pastebin.com/wwBj0swU

21:23 <kenny> got u-boot booting with a combination of what the 2017 repo does and the (broken) mainline instructions. Script & output: https://gist.github.com/KenMacD/8999d48fc7e04dbcd9a832a7edc3da71