<DC-IRC> [Discord] <vulkanizer5308> I am not sure. I have not yet connected to UART.. the LED just shows some heartbeat.
<DC-IRC> [Discord] <vulkanizer5308> But it does that with or without the SD card inserted
<DC-IRC> [Discord] <Werner> Then the heartbeat might come from whatever is stored on SPI flash, so its more or less meaningless.
<DC-IRC> [Discord] <tyro_noob> Have you tried Raspberry pi imager? It has full verify.
<DC-IRC> [Discord] <vulkanizer5308> Thanks. I will try it. But I am not too optimistic
<DC-IRC> [Discord] <vulkanizer5308> I want to connect it via UART
<DC-IRC> [Discord] <vulkanizer5308> how to connect the pins?
<DC-IRC> [Discord] <Werner> Usually with jumper wires. Without things get plainly difficult
<DC-IRC> [Discord] <vulkanizer5308> i have the jumper wires.
<DC-IRC> [Discord] <vulkanizer5308> just where to connect them. RX -> TX, RX -> TX. and there is ground wire
<DC-IRC> [Discord] <Werner> If its not written on the pcb check technical documentation of your board
<DC-IRC> [Discord] <Werner> https://x.na4.eu/KOTu3/baQaMoXu36.jpg
<DC-IRC> [Discord] <vulkanizer5308> yep that it what I have
<DC-IRC> [Discord] <vulkanizer5308> got the output from UART
<DC-IRC> [Discord] <Werner> So it boots perfectly fine
<DC-IRC> [Discord] <Werner> Oddly states H616 while the board has H618 but maybe they are just too close to even bother.
<DC-IRC> [Discord] <vulkanizer5308> but over serial it does not accept any input support
<DC-IRC> [Discord] <vulkanizer5308> annot login
<DC-IRC> [Discord] <Werner> Make sure cables are connected correctly and are not broken. Serial console must work
<DC-IRC> [Discord] <vulkanizer5308> I am using putty. the cables are well connected
<DC-IRC> [Discord] <Werner> Hm no clue. I don't have this board so cannot verify
<DC-IRC> [Discord] <vulkanizer5308> there is TX RX and GND
<DC-IRC> [Discord] <vulkanizer5308> the 5V and 3.3V are not connected anywhere
<DC-IRC> [Discord] <Werner> Thats good since it could fry your board
<DC-IRC> [Discord] <vulkanizer5308> oh i reconnected the TTL board and it accepts inputs
<DC-IRC> [Discord] <vulkanizer5308> just now find the default user and pass
<DC-IRC> [Discord] <vulkanizer5308> 🙂
<DC-IRC> [Discord] <Werner> root 1234
<DC-IRC> [Discord] <vulkanizer5308> oh thanks!
<DC-IRC> [Discord] <tyro_noob> Have you tried another baudrate
<DC-IRC> [Discord] <vulkanizer5308> The internet connection is still not working
<DC-IRC> [Discord] <vulkanizer5308> I have use used armbian-config
<DC-IRC> [Discord] <Werner> Try manually. Bugs can occur
<DC-IRC> [Discord] <vulkanizer5308> yes. I modified the file in /etc/netplan/armbian.yaml to connect to th WIFI.
<DC-IRC> [Discord] <vulkanizer5308> works now! thanks man
<DC-IRC> [Discord] <Werner> great
<DC-IRC> [Discord] <vulkanizer5308> Now I will try it on the Orange Pi Zero 2 W 2GB RAM